User manual

AB Mixer Imagestore User Manual
Page 102
Miranda Technologies Ltd
Analogue faders
Imagestore includes eight analogue fader inputs on the video GPI connector
each of which you can adjust, invert or pickup independently. Previously
each input was dedicated to a particular function but there are now many
more functions each of which can be controlled from analogue fader inputs.
The faders can be assigned to control specific functions from the IS2 front-
panel menu (go to Set up/Fader Setup/Fader Enable). For example, you can
configure an analogue fader to control the AB mix. This increases the
number of possible analogue faders beyond the physical number of ADCs.
See Addendum 1 for further details.
From the Faders Setup menu press the left and right arrow keys W X to
choose the functions you want to control from fader inputs. The top line of
the display shows which fader input (if any) currently controls the function.
For example:
To assign a fader input to control the function, simply press enter.
You can now press the left and right arrow keys W X to choose a fader to
control this function.
In addition to the physical fader inputs (shown as Vid_ADC1 to Vid_ADC8)
you can also control the state of the internal system parameters using various
pseudo faders such as keyer and FTB levels. This enables features such as