User manual

AB Mixer Imagestore User Manual
Page 100
Miranda Technologies Ltd
Wipe softness
Defines the edge profile of the wipe from a hard edge (1) to a soft, fuzzy
edge (128).
Select manual/operate/AB Mixer/wipe softness from the boot-up menu to
locate the feature.
Press the enter key then use the arrow keys W X to increase or decrease the
value. To select the value, press enter. To go back a level press escape.
Colour V fade
This option allows the user to change the V fade colour from the default
factory setting of black to any colour of their choice by adjusting the RGB
values.
Select manual/operate/AB Mixer/V-fade colour from the boot-up menu to
locate the feature.
Press the enter key then use the arrow keys W X to increase or decrease the
colour field value. Pressing the enter key after adjusting the Red value will
change to the next colour field i.e. Green. Pressing the enter key after