User manual

Easysound Stand-alone User Manual Configuration and Set Up
Miranda Technologies Ltd Page 75
KBD and VGA Connections
Hardware interface listings deliberately exclude details of the unit's rear panel
"kbd" and "vga" connectors.
The "kbd" and "vga" connections are solely for use by the Miranda
Technologies Ltd development team and no user functions can be accessed
via these ports. Making any connection to these ports is a high-risk activity
that Miranda Technologies Ltd would strongly advise against.
Imagestore 2 / 3 connections
To connect an Easysound Standalone and an Imagestore 2, Solo, 2U or 3 to a
Presmaster use a RS422 loop through lead. The transmit lines from the ESSA
must NOT be connected.
Presmaster Imagestore ESSA
Pin1 GND Pin 5 GND Pin 5 GND
Pin 2 RX- Pin 1 TX- Pin 1 N/C
Pin 3 TX+ Pin 3 RX+ Pin 3 RX+
Pin 7 RX+ Pin 2 TX+ Pin 2 N/C
Pin 8 TX- Pin 4 RX- Pin 4 RX-