User manual

Configuration and Set Up Easysound Stand-alone User Manual
Page 70 Miranda Technologies Ltd
RS232
Point to point, serial automation control can be achieved using the RS232
serial interface. The port conforms to the normal conventions for a standard
PC serial, D-type, 9-pin, port and the pin format is shown in the following
table.
Pin RS232
2 Rx
3 Tx
5 GND
1, 4, 6 - 9 Not Used
RS422
Serial automation can be achieved using the RS422 serial interface. This port
conforms to the pin format shown in the following table.
Pin RS422
1 Tx -
2 Tx +
3 Rx +
4 Rx -
5 GND
6- 9 Not Used
SDI Control Port
The SDI Control Port is used to connect external faders, GPI's and linear time
code. A full listing of the pin format for this connection is shown in the
following table.