User manual

Common Commands Easysound Stand-alone User Manual
Page 64 Miranda Technologies Ltd
System
The System options allows you to re-configure the parameters described in
the following sections.
System change No Yes
When the System change No Yes option is displayed you can use the arrow
keys W X to select YES and then press the enter key to display the options
described below.
625/525 Line
The 625/525 setting must be set to the appropriate TV standard where PAL =
625 line and NTSC = 525 line. The current setting will be shown enclosed by
brackets. To change the setting, use the arrow keys to select the new setting
and press the enter key to apply it.
Audio Control
When the Audio Control option is displayed you can choose to restart (now
or later) one of the following items:
♦ GPI file
♦ Model
♦ AES 6 Channel
Select reference
To operate as part of a broadcast system, or to operate stand alone,
Easysound Standalone digital video frames must be synchronised to a
reference source.
Miranda Technologies Ltd recommends the use of a common analogue
"black and burst" reference source. Once the initial phase-lock has been set
up, phase locked loop circuits within Easysound Standalone automatically
maintain the synchronisation.