User manual
Easysound Stand-alone User Manual Common Commands
Miranda Technologies Ltd Page 45
Common Commands
The following commands are common to all three modes and can be accessed
from the Set-up menu.
Set inputs
The Set inputs option allows you choose between Input A and Input B.
Input A/B
When the Input A or Input B option is displayed you can choose one of the
following:
♦ SDI Video
♦ Colour (Red 0-100%, Green 0-100% or Blue 0-100%)
GPI inputs assign
General Purpose Interface (GPI) ports may be used either to trigger the
execution of a series of Easysound Standalone internal pre-programmed
commands (input) or to monitor the status of the Easysound Standalone
(output).
AES Control port
The nine GPI ports are identified as GPI 1 through GPI 9. The first seven
ports, GPI 1 through 7, may be configured as either input or output ports
whilst the remaining two, GPI 8 and GPI 9 may only be configured as inputs.
Any GPI, assigned to ‘input’, may have a macro associated with it that
contains up to 10 command lines. When triggered, the commands within the
macro execute sequentially. If the GPI is assigned as an ‘output’, it may only
have a single status associated with it.