User manual

Easysound Stand-alone User Manual Model Mode
Miranda Technologies Ltd Page 31
Data
Selecting Data allows the Easysound to pass and cut a data stream (non audio
signal) carried in the AES path i.e. Dolby Digital® or Dolby E®. The signal
is passed through without applying any gain. When a video AB cut transition
is carried out the point at which the AES data is cut is dependant upon the
transition point.
Use the Data menu to select the following options:
AB Mix mode
Enable Data Path Yes No. Enables the option
Data Is Audio Yes No. Switches AUDIO_USE bit
Input Pair use the arrow keys W and X to selects the input
pair source i.e.
A/B Pair 1
A/B Pair 2
VO1 Pair 1
VO1 Pair 2
Output Pair Preview Pair 1
Preview Pair 2
Programme Pair 1
Programme Pair 2
Transition Point 0 < 50 > 100%. Sets the point at which the AES
data is cut relative the video AB cut
0 = start of transition
50 =mid transition (factory default)
100 = end of transition
Two Voice Overs mode
Enable Data Path Yes No. Enables the option
Data Is Audio Yes No. Switches AUDIO_USE bit
Input Pair use the arrow keys W and X to selects the input
pair source i.e.
BGND Pair 1
BGND Pair 2
VO1 Pair 1