User manual

Easysound Stand-alone User Manual Model Mode
Miranda Technologies Ltd Page 27
with AES and so the input source option is not
displayed)
VO1 Settings/VO2 Settings
Audio model mode enables you to insert voice-overs into your normal audio
programme. In A/B Mix mode you can insert two stereo pair voice-overs into
the mix. In Two Voice Over mode you can insert four stereo pair voice-overs
into the background or programme audio. Each voice-over has two
parameters which need to be set - duck level and VO level (these are
described below).
You use the following menu to specify the VO1 and VO2 settings (note that
VO2 Settings is not available in AB Mix mode):
Duck Preset the duck preset enables you to adjust (dip) the
level of the background audio sound when the
voice over is on – the level is measured in dBs (for
example, when the voice over is on, the
background ducks by –12dB)
choose Pair 1 or Pair 2, press enter and then
set/adjust the duck preset using W and X keys
Voice Over Preset the voice over preset enables you to adjust the
level of the voice over audio when the voice over
is on (for example, when the voice over is on, the
voice over audio comes up to 0dB)
choose Pair 1 or Pair 2, press enter and then
set/adjust the VO preset using W and X keys