User manual

Model Mode Easysound Stand-alone User Manual
Page 26 Miranda Technologies Ltd
Level level enables you to adjust the input level for pairs
or groups in a range from –100dB to +28dB
choose Pair 1 or Pair 2, press enter and then
set/adjust the level using W and X keys
Input Source input source enables you to choose the incoming
audio from the AES streams or the audio
embedded with the video input (choose group 1, 2,
3 or 4 or AES)
VO1 Input/VO2 Input
Use the VO1 Input and VO2 Input menu to specify the following settings
(note that VO2 Input is not available in AB Mix):
Shuffle shuffle enables you to move mono channels
around within a group – and therefore perform
pair swaps
Mute mute enables you to mute pairs or groups
choose Pair 1 or Pair 2, press enter and then
choose Mute On or Mute Off
Trim trim enables you to boost or attenuate pairs in a
range from –6dB to +6dB
choose Pair 1 or Pair 2, press enter and then
set/adjust the input trim using W and X keys
Phase phase enables you to invert the phase of pairs or
groups
choose Pair 1 or Pair 2, press enter and then
choose normal or inverted
Level level enables you to adjust the input levels for
pairs or groups in a range from –100dB to +28dB
choose Pair 1 or Pair 2, press enter and then
set/adjust the level using W and X keys
Input Source input source enables you to choose the incoming
audio from the AES streams or the audio
embedded with the video input (choose group 1, 2,
3 or 4 or AES) – note that the input source option
is only available for VO2 (VO1 can only be used