User manual

Getting Started Easysound Stand-alone User Manual
Page 20 Miranda Technologies Ltd
Front Panel Display
Confirm that the front panel display is showing the boot menu (shown below)
and if not, press the escape key repeatedly until it is. Pressing the right arrow
key X will move the enclosing brackets from manual to set-up. With set-up
selected, press the enter key to display the Set-up menu.
Press the right arrow key Xuntil the words, system information appear on the
second line of the display. Repeatedly pressing the enter key will now cycle
the display through a list of the fitted options and a few system statistics.
When completed, press the escape key a few times until the boot-up menu
reappears.
Front Panel Operations
This section explains, the operation of the Easysound Standalone using the
front panel controls.
Controls
All of Easysound Standalone operational and configuration features can be
monitored and controlled from the front panel of the unit using the
pushbuttons and display. A simple menu-driven procedure provides access to
the operational, configuration and set-up options.
The front panel of Easysound Standalone contains a 3½ floppy disk drive,
four push-button control keys and a vacuum fluorescent display (VFD).
Local control of the unit is "menu driven" using a combination of the push-
button keys together with options displayed on the VFD. The upper key of
the group is identified on the panel as the escape key and the bottom key is
identified as the enter key. Left and right keys W X are used to move a
cursor left and right accordingly to select menu options.
VFD Display
The alphanumeric VFD display is divided into two separate lines. The upper
row of characters indicating the function and the lower row indicating the
current selection and any optional configuration changes that are available.