Instruction manual

GUIDE TO INSTALLATION AND OPERATION
20 | FIO-1901-RR
ANNEX 1 – FIO-1901-RR User Interface (local menu structure)
STATUS NO REAR, FIO-1901-RR-SRP, FIO-1901-TT-SRP, FIO-1901-RT-SRP, FIO-1901-R-SFP, FIO-1901-T-SRP
REAR MISMATCH
OPT.RxA NO LOCK, NOSIGNAL, 270 Mbps, 1.5 Gbps, 3 Gbps
OPT.RxB NO LOCK, NOSIGNAL, 270 Mbps, 1.5 Gbps, 3 Gbps
NO SFP, SFP-RR-LC, SFP-TT-S13S13-LC, SFP-RT-S13-LC, SFP-R-LC, SFP-T-S13-LC,
SFP-RR-W-LC,SFP-TT-C27C29-LC, SFP-TT-C31C33-LC, SFP-TT-C35C37-LC, SFP-TT-C39C41-LC,
SFP-TT-C43C45-LC, SFP-TT-C47C49-LC, SFP-TT-C51C53-LC, SFP-TT-C55C57-LC,
SFP-TT-C59C61-LC, SFP-TT-W13W15-LC
SFP MISMATCH
SFP VENDOR NAME (ex: GENNUM, OE ELECTRONICS,…)
SFP PART NUMBER (ex GO2920)
SFP REVISION
SFP TEMPERATURE (ex: [TEMP: LOW, NORMAL, HIGH])
SFP RECEIVE POWER A, (ex: RxA PWR: -15dBm, LOW, HIGH)
SFP RECEIVE POWER B, (ex: RxB PWR: -15dBm, LOW, HIGH)
FAIL OVER MODE [OFF, ON]
FAIL DELAY [0,…,3,…,14,15] seconds
OUTPUT CONFIG ELE.OUT A [OPTICAL RxA, OPTICAL RxB] .
ELE.OUT B [OPTICAL RxA, OPTICAL RxB
]
RECLOCKER OPTICAL RxA [ON, BYPASS]
OPTICAL RxB [ON
, BYPASS]
USER PRESET LOAD [USER 1 ,USER 2, USER 3, USER 4, USER 5]
SAVE [USER 1 ,USER 2, USER 3, USER 4, USER 5]
CONFIG ALARMS OPT.RxA NO LOCK ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
OPT.RxA NO SIGNAL ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
OPT.RxB NO LOCK ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
OPT.RxB NO SIGNAL ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
OPT.RxA PWR WARN ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
OPT.RxA PWR ERR. ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
OPT.RxB PWR WARN ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
OPT.RxB PWR ERR. ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
SFP TEMPERATURE ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
R./SFP MISMATCH ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
NO SFP ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE
, GPI]
VERSION FIO-19RR: XXX
CPU BUILD: YYY
FACTORY DEFAULT RESTORE
Only if Fail Over mode is OFF
Onl
y
if matched SFP
p
resent
This item does not a
pp
ear if the rear is matched to the card t
yp
e
This item does not a
pp
ear if the SFP is matched to the card t
yp
e and rear