Specifications

ENC-1103 SDI to Composite/CAV/RGB Encoder
Guide to Installation and Operation
ENC-1103 Page 9 of 19
IP SCOPE Option: to activate this option, you must obtain a
licence key from Miranda Technologies. Type in the licence key in
the box. Click the ENABLE OPTION button to enable the
waveform monitor and vector scope feature.
To view the waveform monitor and vector scope data, use the
Streaming Player that is provided with the iControl software.
Consult the iControl documentation to learn more about the
Streaming Player.
Click in the ENABLE checkbox to enable the waveform monitor and
vector scope data transmission, and select the line that will carry
the data using the slider below. The REFRESH RATE pulldown
box selects the desired refresh rate: Fast, 1 sec, 2 sec, …, 9 sec,
10 sec.
ABUS tab
When optional audio cards such as the UAP-1781 are used to
provide additional audio signals, the ABUS audio bus links installed
audio cards and the ENC-1103. The ABUS tab is used to instruct
the ENC-1103 about the presence of installed audio cards.
Multiple Card Config sub-section:
The indicators signal the presence of UAP-1781 cards installed in
the chassis. To enable the audio bus, use the pulldown box and
select your system’s configuration. Selecting Video restricts
available audio signals to audio channels embedded in the SD
input signal; Video / A1 or Video / A1 / A2 adds signals incoming
from the installed audio cards detected.