Instruction manual

GUIDE TO INSTALLATION AND OPERATION
2 | IRD-3111
Conditional Access
• DVB-CI common interface slot allow insertion of CAM card
• Allow descrambling of multiple programs encrypted by leading DVB Conditional Access Systems
• Supports BISS-1
RF Input Monitoring
• Automatic detection of RF loss
• Convenient auto-scan mode for detection of valid signals
• Monitoring of input signal strength, bit error rate (BER) and carrier to noise ratio (CNR)
Easy Input and Program Selection
• Manual or automatic input selection mode
• Automatic mode allows switching to backup input upon loss of signal on active input, with adjustable duration
• Program selection using local control or iControl
• Extensive transport stream structure is displayed allowing easy identification of individual programs in an MPTS
• MPTS automatic program selection mode and recovery
Optional Video Up-Conversion
• The IRD-3111 can decode and output SD signals. With the up conversion option activated, HD output formats
are available and include:
o 1920x1080i 59.94
o 1920x1080i 50
o 1280x720p 59.94
o 1280x720p 50
o 720x486i 59.94
o 720x576i 50
Comprehensive Audio Decoding
• Decoding of MPEG-1 Layer 2 stereo audio
• Support of Dolby Digital (AC-3) 2.0 audio
• Optional decoding and embedding of Dolby Digital (AC-3) 5.1 audio to SDI with support of main and associated
audio services for up to discrete 8-channel output
• Selectable passthrough of Dolby Digital stream to SDI
• Decoding of AAC Audio for 2/0 and 1/0 coding modes
Frame Synchronizer/Delay and Reference Input
• Supports timing, full phasing and freeze modes
• Reference can be external via BNC connection, internal using Densité REF-1801 module or directly from the
decoded signal with selectable genlock modes
• Video proc amp functions including, brightness, saturation, hue and contrast
Decoded Video Format Identification
• Convenient identification of key video parameters
o Aspect ratio identification: 16:9 or 4:3
o Video resolution
Audio Processing and Format Identification
• Provides down mix of 5.1 channel to Lt/Rt or Lo/Ro modes
• Extensive Dolby Digital Status reporting, including:
o Service and Source Channel ID
o Low Frequency Effect (LFE) presence detection