Instruction manual

GUIDE TO INSTALLATION AND OPERATION
IRD-3111 | 33
Copy Profile From:
This section shows this IRD-3111 card, and identifies it by App server, Densité
frame and slot number, card type and firmware version.
The Profile column has a pulldown that allows you to select which profiles you
will work with, and gives these choices:
• Current, User1, User2, User3, User4, User5, ALL
The Select column includes a checkbox, preselected as checked, to confirm that
you want to work with the current card
Save Profile to Disk…
Click this button to open a Save dialog allowing you to
specify a file name and location to which the selected
profiles for this card will be saved.
Hint - It is a good idea to create a folder for these files,
because they are not explicitly identified as IRD-3111
profiles, and will be difficult to find and identify if not clearly
named and conveniently located.
• Click the save button once the name and location
have been identified in the Save box
• If the file is saved correctly, the Transfer Status box
on the right of the Copy profile from line will indicate
Succeeded against a green background
• If the file was not saved for some reason, the
Transfer Status box to the right of the Copy profile
from line will indicate Failed against a red
background
Restore profile from disk…
Click this button to open an Open dialog box within which
you can locate and select a valid IRD-3111 profile file.
• Click Open to read the contents of the file and to
reconfigure this IRD-3111’s profiles according to its
contents
• While the reconfiguration is in progress, the Transfer
Status box on the right of the Copy profile from line
will indicate Working against a yellow background
• When the reconfiguration is complete, the Transfer
Status box on the right of the Copy profile from line
will indicate Succeeded against a green background
Note: There is no need to select a profile using the Profile
pulldown (e.g. current, User1, etc.) when restoring a
profile from disk, because the profile selection is stored
within the file.
Figure 3.31 Save Profile to disk
Fig 3.32 Restore profile from disk
Figure 3.30 Select profile to cop
y