Instruction manual

GUIDE TO INSTALLATION AND OPERATION
DAP-1781 |
37
Encode Latency
This parameter specifies the Latency of the Dolby Digital encoder, in both encoding and pass-through mode.
It ranges from 150 ms to 450 ms, with 187 ms default value.
4.3.3.3 Status
Encoder
This parameter indicates the operational status of the encoder.
Metadata Bit-Stream
The Metadata will be reported as invalid if it contains missing and/or invalid parameters or erroneous
segment checksums.
Input Program Config
Refer to the Metadata tab to visualize or modify the Metadata stream used by the encoder.