Instruction manual

GUIDE TO INSTALLATION AND OPERATION
24 | DAP-1781
4 Remote control using Miranda’s iControl system
The operation of the DAP-1781 may be
controlled using Miranda’s iControl
system.
• This manual describes the control
panels associated with the DAP-
1781 and their use.
• Please consult the iControl User’s
Guide for information about setting
up and operating iControl.
In iControl Navigator or iControl Websites,
double-click on the DAP-1781 icon to
open the control panel.
Note the following features of this panel:
Panel selection buttons
The buttons on the left side of the panel
are used to select the contents of the right
portion of the screen.
• The selected button is highlighted,
and the main screen heading
matches the button name.
The column of buttons can be hidden or revealed by
clicking the arrow icon at the left-hand side
(compare the two figures on the right).
The individual control panels are described in detail
below.
Panels See Page
Audio Processing 26
Audio Output 29
Dolby 32
Metadata 38
Dynamic Proc. 1-8 43
Dynamic Proc. 9-16 44
UP/DOWN MIX 45
UPmax 49
Channel Status 51
Audio Type 52
RALM 53
A-BUS 54
Reference Input 54
Rear Type 56
Factory / Presets 56
Options 58
Alarm Config. 59
Info 60