Operating instructions

GUIDE TO INSTALLATION AND OPERATION
10 | AAP-1741
3.3 Remote control using iControl
The operation of the AAP-1741 may be
controlled using Miranda’s iControl system.
• This manual describes the control
panels associated with the AAP-1741
and their use.
• Please consult the iControl User’s
Guide for information about setting up
and operating iControl.
In iControl Navigator or iControl Websites,
double-click on the AAP-1741 icon to open
the control panel.
Note the following features of this panel:
Panel selection buttons
The buttons on the left side of the panel are
used to select the contents of the right
portion of the screen.
• The selected button is highlighted, and
the main screen heading matches the
button name.
The column of buttons can be hidden or
revealed by clicking the arrow icon at the
left-hand side (compare the two figures on
the right).
All of the individual control panels are
described in detail below.
Panel See Page
Audio Processing 12
Dynamic Proc. 1-4 14
Dynamic Proc. 9-16 15
Audio Output 16
UP/DOWN MIX 18
Audio Type 21
RALM 22
A-BUS 23
Reference Input 24
Rear Type 25
Factory / Presets 25
Options 27
Alarm Config. 27
Info 28