User's Manual 22 LCD Display Table of Contents Important Safety Instructions ................................................................................... 02 Cautions................................................................................................................... 03 Descriptions and accessories .................................................................................. 05 Guidelines for Stand Setup .............................................................................
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Cautions [Caution] To protect your device from electrical damage, be sure to plug the cord into socket securely. [Caution] If you use the LCD TV with video games, computers, or similar products, keep brightness and contrast at a low level. Images with high level brightness or contrast may "burn on" the screen permanently. [Tips for cleaning the LCD TV] 1. Wipe the LCD TV with soft or dry cloth. 2. DO NOT use solvent or methyl benzene. Harsh chemicals may damage your LCD TV. 3.
Cautions [Maintenance] If any of following occurs, unplug the LCD TV and contact your distributor or appointed technician to repair the LCD TV: 1. The power cord or plug is damaged. 2. Liquid enters the LCD TV. 3. LCD TV is damp or wet. 4. LCD TV is damaged. 5. LCD TV malfunctions. DO NOT attempt to repair the LCD TV by yourself. There are high voltages inside the cabinet which poses a risk of electric shock.
Descriptions and accessories Top View LCD Panel Side View Front View Control panel Earphone output Power LED IR Remote receiver Speakers Rear View PC & Video Connectors Power Connector Accessories 1. 2. 3. 4. 5. Power cord Adapter Remote control AAA battery X 2 Manual Swivel Stand The LCD TV can be conveniently swivelled on its stand 20° to the left or right to provide the optimum viewing angle. Installation of batteries 1. 2. Insert two AAA batteries into the Remote control.
Guidelines for Stand Setup Stand Installation Instructions: •To use the stand arrowhead put into combine and turn left on its stand to be placed in the middle position. STEP 1: arrow of base arrow of arm STEP 2: round point of base arrow of arm 06 ................................................................................................................................................................
Connectors and sockets LCD Display installation AC 100~240V Power outlets differ from region to region (White) (Red) PC or DVD Player HDMI Input (digital) and Audio input VGA Input (analog) and Audio input * VGA Support YPbPr Compatible and Tuner Input SCART Input 2 SCART Input 1 R/L Audio Cable R/L Audio Cable PC Audio Cable (Green) (Blue) (Red) PC or DVD Player Port * YPbPr ↔ VGA Adapter DVI ↔ HDMI Adapter HDME Cable OUTPUT DC 12V Input Connection (White) (Red) DVD Player Function
LCD Display installation Connectors and sockets Power Connection Connect the AC power cord to the LCD-Display and plug into an appropriate wall outlet. AC 100~240V Power outlets differ from region to region. Turning your LCD Display on Press the POWER button on the front lower right of the TV to switch between on and standby modes. Power indicator Status Green -- Power on Red ---- Standby. Power Programming TV channels 1.
LCD Display operation Control panel keys Button Description MENU Press to display and adjust the features in the On-Screen Display. Use the four arrow keys (channel and volume adjustments) to navigate the menu options. CH (FUNCTION S/T) Press to switch between preprogrammed channels. Press to move between functions in the OSD. VOL +/(ADJUST W/X) Press to adjust the volume. Press to adjust the values of a function. SOURCE Press to change between video input signals.
LCD Display operation Remote control functions 1. POWER Press to turn on the LCD Display or enter standby mode. 2. INFORMATION (i) Press to display the current signal status, including input source/channel/audio mode./ picture mode. 3. SOURCE Press to select the signal source you want. This button allows you to switch between signal sources. 4. MUTE Press to toggle audio on and off. Press again or press volume +/- to restore the previous volume level. 5.
LCD Display operation Remote control functions TELETEXT (Designed for Europe PAL/SECAM system only) (menu navigation) 15. MENU Press to activate the LCD Display menu. Press again to quit the menu. You can press to select and confirm your selection. 16. ENTER / EXIT / FAV / PG / SUBTITLE / MHP / 100/- Not available on this model. 17. TEXT/MIX Press to activate Teletext. Press again to activate Teletext with TV Press again to turn off Teletext. 18.
Display menu Using the advanced menu Using the on screen display(OSD): 1. 2. 3. 4. 5. 6. 7. Press the MENU button on the remote control to display the main menu. Press the ST buttons to highlight the menu entries. Press the ► button to enter the submenu. Press the ST buttons to highlight the item to be adjusted. Press the ► to confirm your choice. Press WX to adjust the setting. Press the MENU button again to quit the picture. NOTE: Items in gray cannot be selected and adjusted.
Display menu Using the advanced menu PC (for VGA) Menu Descriptions Auto Adjust To allow the monitor to determine and select the horizontal and vertical adjustment, and clock and phase settings that are most appropriate for your system requirements. White Balance To return the display's brightness and contrast to the default settings. Contrast To adjust the difference between the lightest and darkest areas of the LCD display screen.
Display menu Using the advanced menu ADVANCED Menu (for TV / SCART / YPbPr / VGA / HDMI ) Descriptions NDR To adjust noise reduction level LTI To adjust the H/V Luminance Transient Improvement function DCI To adjust dynamic color adoption Recall To return all advance function settings to their factory-set default values. 14 ................................................................................................................................................................
Display menu Using the advanced menu TV SETUP (for TV ) Menu Descriptions Country To select your country. CH-Scan To automatically scans for available channels. Manual Scan To select system , program no. , name and search channel manually. Once TV detects a good signal, TV locks channel automatically and searching process stops. To modify channels: PR-Edit 1.
Display menu Using the advanced menu AUDIO (for TV / SCART/ YPbPr / VGA / HDMI ) Menu Descriptions Bass To adjust the bass level. Treble To adjust the treble level. Balance To balance speaker channel. Recall To return all Audio function settings to their factory-set default values. SYSTEM (for TV / SCART / YPbPr / VGA / HDMI ) Menu Descriptions Language To change the language in which the OSD menus appear. Lamp To adjust lamp currently.
Other Information Troubleshooting The following table contains common problems and the possible solutions. Please check this list before you contact a technician. Problems No picture Abnormal colors Twisted picture Picture too dark Audio only, no images Picture only, no audio Cannot use remote control Reasons 1. Did you connect the power cord? 2. Did you turn on the power? 3. Is the signal cable connected correctly? 4. Is the screen in energy-saving mode? 1. Is the signal cable connected correctly ? 1.
Other information Display panel Compatibility Power Adapter Environment Other Specifications Active Area / Screen Size 22” TFT LCD Aspect Ratio Widescreen 16:10 Max. of Pixels 1680(H)X1050(V) Mode TN PC 640*480@60/75Hz 800*600@60/75Hz 1024*768@60/75Hz 1360*768@60Hz 1680*1050@60Hz Components HDMI 1080i / 720p / 576i / 576p / 480i / 480p Input Voltage AC100-240V, 1.
