System information

User Instructions
Once you have the leg and chest strap tightened, stow
all excess webbing away. Excess webbing can cause
an entanglement during deployment or could be
grabbed inadvertently. [Fig.6]
Remove the harness/container by reversing this
process.
IMPORTANT: This manual does not replace proper
training and equipment orientation.
Thread the chest strap through the friction adapter.
Tighten until comfortable. [Fig. 4]
Fig 5
Fig 4
Fig 6
IMPORTANT: Make sure the chest strap is threaded
properly through the friction adapter. If you have any
questions consult your rigger or instructor. [Fig. 5}