System information

The RSL System
Prior to closing flap #6, thread reserve ripcord through
the RSL rings [Fig.5], with the ring on the RSL lanyard
between the two rings on flap #6. After closing flap #6,
neatly tuck the excess lanyard under the reserve clos-
ing flap.
IMPORTANT: Proper configuration of the reserve
ripcord through the RSL rings is critical to the proper
function of the RSL system!
Attach the snap shackle to the main riser RSL ring and
inspect routing. The RSL shackle must not interfere with
the operation of the 3-Ring System. [Fig. 4]
Mate 5/8” hook Velcro to rear reserve riser. [Fig. 3]
Fig. 3
Fig. 4
Fig. 5