Specifications

8
SEE ON
MIRAGE QC
CABLE-FREE QUICK-CONNECT SYSTEM
Mirage QC, Clay Paky’s new semi-transparent LED display, presents
an innovative and patented mounting and connection system that
makes LED walls of all sizes even safer and quicker to install.
IP65-protected for outdoor use, the Mirage QC is made for touring
applications demanding the simplest possible installation. Its bayo-
net system is specifically designed to allow mechanical and electrical
mounting of two panels in a single, simple step – no tools needed.
Rows of panels can also be attached horizontally with the help of
quick and simple safety systems.
Using this revolutionary attachment system, it takes just minutes to
mount and dismount an entire LED wall, eliminating the need for ac-
cessories such as wires, connectors or hooks. It not only reduces la-
bour, it also dramatically simplifies stock.
VIDEO DISPLAY MAIN FEATURES
• Pixel Pitch: 20 mm (0.79 in)
• LED type: High-brightness full-colour SMD
• Resolution: 32 x 32 pixel per module (total: 1024 pixel)
• LED density: 2.500 LED/sqm
• Luminous flux: 2.350 cd/sqm (NIT)
• LED lifetime: 50,000 hrs
• Colours: 16.7 million with additive RGB colour mixing
• Input video maximum resolution: 1024 x 768 pixel
• Viewing angle: 170°
• Power supply: AC 220-240 V, 50/60 Hz
• Dedicated interface (Sender Box) for video signal distribution and
screen configuration.
• Software functions: display configuration, intensity adjustment,
colour calibration, content management and system settings.
MAIN MECHANICAL FEATURES
Module size: 640 x 640 x 70.5 mm (25.20 x 25.20 x 2.78 in)•
Module weight: 6 kg (13 lbs 3 oz)•
Weight per square meter: 15 Kg (33 lbs)•
Protection grade: IP65 (front and rear)•
Supported load (vertical): 100 Kg / 220 lbs (17 modules)•
New rack-mounted touring-proof controller•
safety lock
Truss hangers
side connector
vertical connector
female (bottom)
male (top)
vertical locking block
Power and Data connection block
www.claypaky.it/en/promo/multimedia/mirage
www.youtube.com/watch?v=MCxPcEmbRok
Connection of 4 led modules