Operating Instructions

1、 on / off：ong press ON / OFF to turn it on and shut it off

2、Volume plus：Short press can increase the volume of the microphon

3、Volume reduction：Short press to reduce the volume

4、set up：Short press the SET key can switch the frequency point in the frequency table, switch the blue light

flashing, the blue light flashing stop, the frequency point switching successfully;

5、locking key：After pressing lock, the default current microphone frequency priority, lock state is green

6、 Charging input: the red indicator light is on when charging, and the red indicator light is off when fully

charged

M910 Frequency range: 90 MHZ-92 MHZ

M910

operating instructions：

MEquipment System:Analog signal

PAGE 1
M910 Frequency range: 90 MHZ-92 MHZ Equipment System:Analog signal M M910 operating instructions： 1、 on / off：ong press ON / OFF to turn it on and shut it off 2、Volume plus：Short press can increase the volume of the microphon 3、Volume reduction：Short press to reduce the volume 4、set up：Short press the SET key can switch the frequency point in the frequency table, switch the blue light flashing, the blue light flashing stop, the frequency point switching successfully; 5、locking key：After pressing lo
PAGE 2
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.