Installation Instructions

Travertine Fill Kit:
Repairs small holes in travertine. Replaces factory filler. Dries to a matte
finish.
Surfaces: Travertine
Coverage: 50-200 sq.ft. per pound.
Result: Repairs small holes in travertine helping to creating a solid and void
free
surface. Improves appearance and keeps surface easy to clean.
PRODUCT FEATURES:
• This factory-quality travertine fill kit powder repairs small holes in
travertine
• Added accelerants provide adhesive properties. THIS IS NOT A GROUT
• Available in a Light and Dark color. Can be mixed together to match any
travertine
color perfectly.
DIRECTIONS:
Requirements: Soft grout trowel, bucket and sponge. Be sure surface is dry,
clean
and free of any foreign surface wax or sealer.
1) Mix Travertine fill kit powder in a bucket with clean water.
• For smaller holes, mix into a thinner consistency.
• For larger holes, mix into a slightly thicker consistency.
Only mix as much Travertine fill kit as can be used in 10-15 minutes. After
10-15 minutes,
your mixed Travertine fill kit will begin to thicken and become difficult to
work with.
2) Apply an even skim coat over surface and into holes using a soft grout
trowel.
With larger holes, apply more product over surface holes to minimize
shrinkage.
3) Allow product to completely dry on surface. This may require 10-15
minutes
(depending area temperature and moisture).
4) After product is completely dry, clean the excess using a moist sponge.
Please wipe consistently.
NOTE: If the product is not dry when cleaning (see step 4), the moist
sponge may