Technical Specifications

P R O DU C T D ATA S H E E T
www.miraclesealants.com
Poultice Plus
11 - 2013
Ready to Use Cleaner For
n
Sanded Grout
n
Non-sanded Grout
n
Mortar
n
Ceramic Tile
n
Quarry Tile
n
Porcelain Tile
n
Clay Pavers
n
Marble
n
Limestone
n
Travertine
n
Granite
n
Slate
n
Other Natural Stone
Special Features
n
Non Acid
n
Non Bleach
n
Fast Acting
n
User Friendly
PRODUCT DESCRIPTION
KEEP OUT OF REACH OF CHILDREN. Poultice Plus is an easy to use, fine,
non acidic absorption powder. Poultice Plus is effective in removing stains
that are deep into the substrate. Poultice Plus can be effective when used
with “distilled water” or many other chemical additives, see the Miracle
Sealants’ Stain Removal Guide. Poultice Plus’ absorptive action draws out
most stains from within the substrate with little or no effort or technical
know how necessary.
Sample Testing
Due to the differences of each substrate, several inconspicuous test patch-
es should be completed to assure maximum performance. User must
determine suitability of the product for their intended use.
Protect Neighboring Surfaces
Always protect neighboring surfaces including masonry, wood, carpet,
metal, landscaping and other non masonry surfaces.
APPLICATION INSTRUCTIONS
Read entire label and SDS/PDS before using.
All previous applied sealers, coatings and/or waxes must be removed using
Mira Strip or Finish Sealer Stripper as directed.
Mix Poultice Plus with “distilled water” or appropriate chemical to form a
peanut butter like paste. The paste should be pliable but not runny. Apply
the paste directly to the stain approximately 1/4" - 1/2" thick. Overlap the
stain by approximately 1/4"- 1/2". Cover the paste with plastic wrap and
tape the plastic with “non marking” tape to create an airtight seal. Allow
the paste to dry completely, approximately 24 - 48 hours. Remove the plas-
tic wrap and scrap the dried paste from the substrate with a non scratching
utensil like a plastic putty knife or spatula. Rinse off all residue with clean
“distilled water”. If the stain is lighter but not completely removed repeat
the same procedures. It may be necessary to use multiple applications to
remove some stains.
Some stains can be removed more easily by mixing the appropriate
chemical with Poultice Plus. Refer to the Miracle Sealants Company Stain
Removal Guide for additional information.
Heavy Duty Cleaning: Use Phosphoric Acid Cleaner , HDAC or Liquid
Poultice as directed.
Light Cleaning: Use Tile & Stone Cleaner, Grout Cleaner, Porcelain &
Ceramic Tile Cleaner, Limestone/Travertine Soap or Counter Kleen as
directed.
Color and Gloss Enhancement
For added color with “Textured and Non polished” surfaces, 511 Seal &
Enhance or Mira Matte may be used. For porous type “Pavers”, 511 Seal &
Enhance may be used as directed.
Polish Enhancement
Periodically use Mira Dust, Marble Conditioner or Granite Brite as directed.
Water, Stain & Slip Protection
To protect cleaned area from future soiling and staining and increase static
coefficient of friction, we recommend applying the appropriate Miracle
Penetrating Sealer/Impregnator.
Coverage
Coverage will vary depending on density, porosity, texture, surface absorp-
tion, weather, time solution left on surface and application methods. Used
as directed, Poultice Plus will clean approximately 5 - 10 square feet per
1 pound container.
MAINTENANCE
For ongoing maintenance instructions please refer to Miracle Sealants Care
Guide. Refer to the Miracle Sealants Product Recommendation Chart for
specific product recommendations.
Storage
Store Poultice Plus in the original upright container, properly sealed and
unmixed. Stored at 77° F (25° C), Poultice Plus has no shelf life. Do not
allow to freeze.
Technical Support
For additional technical support, contact Miracle Sealants Company at
1-800-350-1901 or 626-443-6433 ext. 3013
Office Hours
Monday - Friday from 8:30 am - 5:00 pm PT.
1-626-443-6433 or 1-800-350-1901 • Fax: [phone]
website: www.miraclesealants.com
Product Damaged During Transportation
If product is damaged during transportation contact
Info Trac @ 1-800-535-5053
Additional Products
Miracle Sealants Company offers a complete line of water & stain repel-
lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-
ery and accessories for the tile, stone, concrete, metal, fabric and carpet
professional or do-it yourself specialist.
Caution
Store in cool area. Only use this product in well ventilated areas. Good ven-
tilation means that fresh air is flowing in such a way to feel a slight breeze.
Continue to ventilate until odors are completely eliminated. Avoid contact
with skin. Chemical resistant gloves should be worn at all times. Keep small
children and pets out of area until product or surface has thoroughly
dried. Refer to the SDS for additional information.
Warranty
Instructions are a condensed guide and should not be considered com-
plete. In the event of failure, the only obligation of Miracle Sealants
Company shall be to replace such products proven to be defective. Before
using, user shall determine the suitability of the product for their intended
use. User assumes all risks and liability whatsoever in connection therein.
Neither seller nor manufacturer shall be liable for any injury or inability to
use this product.