MSDS

P R O DU C T D AT A S H E ET
www.miraclesealants.com
Mira Strip
02-2009
Fast Acting Floor Coating/Wax Stripper For
Polished, Honed & Textured Surfaces Including:
■
M
arble
■
G
ranite
■
L
imestone
■
T
errazzo
■
Concrete
■
Ceramic Tile
■
Quarry Tile
■
Grout
Uses
■
Interior & Exterior
Special Features
■
F
ast Acting
■
E
asy-to-Use
■
C
ost Effective
PRODUCT DE SCRIPTION
KEEP OUT OF REACH OF CHILDREN. Mira Strip is a fast acting, stripper
designed to remove traditional solvent base coatings and waxes for prepa-
ration of one of the Miracle Penetrating Sealers and/or Color
Enhancement products. Mira Strip will effectively remove Mira Matte color
enhancer when necessary and may be effective for removing some food
greases, tar and other hard to remove stains from tile, grout and stone sur-
faces. Not for use on resin base products including polyester and epoxy
agglomerates, terrazzo and grouts.
Special Note: Mira Strip has a strong odor and should be used in a well
ventilated area.
Sample Testing
Due to the differences of each material, several inconspicuous test patches
should be completed to assure maximum performance. User must deter-
mine suitability of the product for their intended use.
Protect Neighboring Surfaces
Always protect neighboring surfaces including wood, carpet, metal, land-
scaping and other non masonry surfaces.
APPLICATION INSTRUCTIONS
Read entire label and PDS/MSDS before using. This product should be
used directly from container and is not under any circumstances to be
thinned or diluted with anything before use.
Apply Mira Strip full strength to the surface with a clean mop. Be sure to
completely saturate the surface being cleaned. Allow solution to sit on the
surface for 10 - 20 minutes agitating periodically with the appropriate strip-
ping pad or brush. Do not allow Mira Strip to dry on the surface. Agitate
area one last time while adding more product and removing remains.
Remove all Mira Strip from the surface with a wet vacuum or clean, dry
towels. More than one application may be necessary to remove accumulat-
ed buildup. Thoroughly rinse completed area with clean water and allow to
dry. Pour clean water on area being cleaned and agitate one last time
before extracting all the dirty remains with a wet vacuum system. Note:
Always allow used towels to completely dry before discarding. Once the
coating and/or wax has been removed an additional deep cleaning may be
necessary. For this procedure use the appropriate Miracle Cleaner as direct-
ed for each surface. (See the product chart).
Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence,
grout haze, rust and other heavy dirt and grime use Phosphoric Acid
Cleaner or GCFR (Grout & Concrete Film Remover) as directed. Do not use
GCFR, Phosphoric Acid Cleaner or Sulfamic Acid Crystals on polished
marble, limestone or any acid sensitive stone or tile. If an additional deep
cleaning is necessary use Liquid Poultice cleaner as directed. All strippers
and/or cleaners should be thoroughly rinsed with clean water and the
materials allowed to dry.
For a non-acid deep clean, use Liquid Poultice as directed.
Light Duty Cleaning: Use Mira Clean #1, Porcelain & Ceramic Tile Cleaner,
Counter Kleen or Mira Soap as directed.
Mold, Mildew and Bacteria Sanitation
For best results in killing mold, mildew, bacteria and other micro organisms,
use Miracle Wipes as directed.
Residue Removal
To remove accumulated 511 Sealer residue, use Residue Remover as direct-
ed.
Color & Gloss Enhancement
For color and gloss enhancement, refer to the product recommendation
chart.
Water, Stain & Slip Protection
To protect cleaned area from future soiling and staining and increase static
c
oefficient of friction, we recommend applying the appropriate Miracle
Penetrating Sealer/Impregnator.
Coverage
Coverage will vary depending on density, porosity, texture, surface absorp-
tion, weather, time solution left on surface and application methods. Used
as directed, Mira Strip will cover 200 - 300 square feet per gallon (18 - 27
square meters per 3.785 liters).
MAINTENANCE
For ongoing maintenance instructions please refer to Miracle Sealants Care
Guide. Refer to the Miracle Sealants Product Recommendation Chart for
specific product recommendations.
Storage
Store Mira Strip in the original container, properly sealed and unmixed.
Stored at 77
0
F (40
0
C), Mira Strip will have a shelf life of 12 months. Do not
allow to freeze.
Technical Support
For additional technical support, contact Miracle Sealants Company at
1-800-350-1901 or 626-443-6433 ext. 3013
Office Hours
Monday - Friday from 8:30 am - 5:00 pm PT.
1-626-443-6433 or 1-800-350-1901 • Fax: [phone]
website: www.miraclesealants.com
Product Damaged During Transportation
If product is damaged during transportation contact
Info Trac @ 1-800-535-5053
Additional Products
Miracle Sealants Company offers a complete line of water & stain repel-
lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-
ery and accessories for the tile, stone, concrete, metal, fabric and carpet
professional or do-it yourself specialist.
Warranty
Instructions are a condensed guide and should not be considered com-
plete. In the event of failure, the only obligation of Miracle Sealants
Company shall be to replace such products proven to be defective. Before
using, user shall determine the suitability of the product for their intended
use. User assumes all risks and liability whatsoever in connection therein.
Neither seller nor manufacturer shall be liable for any injury or inability to
use this product.
Caution
Mira Strip contains petroleum distillate. All solvents must be considered
toxic and must be used in a well ventilated area. Good ventilation means
that fresh air is flowing in such a way as to feel a slight breeze. Open win-
dows and use fans to circulate air. Continue to ventilate until vapors are
eliminated. Exposure to high vapor concentration must be avoided. Inhaling
the vapors can be harmful. Keep away from heat and open flames. Avoid
prolonged contact with skin. Chemical resistant gloves should be worn at
all times. Keep small children and pets out of area until product or surface
has thoroughly dried. Refer to the MSDS for additional information.