Technical Specifications
MSC-038 - Grout Sealer
Revision Date: 24-Jul-2014
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 2 / 6
4. FIRST-AID MEASURES
First Aid Measures
Eye Contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If
eye irritation persists: Get medical advice/attention.
Skin Contact
Wash off immediately with soap and plenty of water.
Inhalation
Remove to fresh air. Artificial respiration and/or oxygen may be necessary. Call a physician.
Ingestion
Drink a quart of water. Induce vomiting, but only if victim is fully conscious. Seek medical
attention. Never give anything by mouth to an unconscious person.
Most important symptoms and effects
Symptoms
May cause mild skin and eye irritation. May cause nausea, vomiting and/or diarrhea if
ingested. Gross over-inhalation may cause symptoms such as but not limited to coughing.
Indication of any immediate medical attention and special treatment needed
Notes to Physician
Treat symptomatically. May also aggravate pre-existing lung disorders.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Water. Dry chemical. Carbon dioxide (CO2). Foam.
Unsuitable Extinguishing Media
Not determined.
Specific Hazards Arising from the Chemical
Non-combustible. Non-flammable.
Hazardous Combustion Products Carbon monoxide. Carbon dioxide (CO2). Hydrogen fluoride.
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Use personal protective equipment as required.
Environmental Precautions
Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. See
Section 12, Ecological Information. See Section 13: DISPOSAL CONSIDERATIONS.
Methods and material for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so.
Methods for Clean-Up
Observe precautions from other sections of this data sheet. Collect any spills with
absorbent material such as vermiculite, place collected material in a polyethylene line metal
container and seal. Clean up residue with water.