Technical Specifications

www.miraclesealants.com
PR O DU C T DATA S H E E T
Grout Release
02-2018
Release for all Cement, Epoxy, Urethane Grouts and Mortars for use with:
Uses
■
■
Quarry Tile
Glazed Tile
Travertine
Quartz
Kitchen
Patios
■
■
■
■
'ue to the differences of each substrate, several inconspicuous test
patches should be completed to assure maximum performance.
User must determine suitability of the product for their intended use.
PRODUCT DE SCRIPTION
KEEP OUT OF REACH OF CHILDREN. This product is formulated for
sealing surfaces prior to grouting the surface. Grout Release
provides resistance against cement, epoxy, urethane and new age
grouts from “sticking” to the surface and potentially staining the
surface. Grout Release is a unique polymerized silicone formulation
designed to repel all types of grout and mortar residue. Grout
Release penetrates into the surface and forms an invisible barrier
that is resistant to grout and mortar sticking to the surface and
potentially staining the surface, while allowing vapor to escape.
Grout Release is not a surface coating and will not alter the natural
look. Grout Release can be used on interior and exterior
applications. Grout Release is U.V. transparent and will not yellow
under any circumstances.
Sample Testing
NEW INSTALLATIONS - APPLICATION INSTRUCTIONS
Read entire label and SDS before using. Grout Release should not
be diluted or thinned in any way. Grout Release should be used as is
direct from approved container.
Before Grouting: Apply Grout Release to the surface prior to
grouting. This step will allow quick and easy cleanup after grouting.
Grout can stain many surfaces if this procedure is not used prior to
the grouting process. Apply Grout Release using a Mira Brush, Micro
Fiber or a clean towel. Apply enough to wet the surface. (See
coverage charts) Be careful not to saturate the open grout joints.
Allow Grout Release to stand for approximately 3 - 5 minutes for
maximum penetration. All excess must be removed at this time by
buffing surface with a clean dry towel or Micro-Fiber cloth. This is
very important on polished, glazed and porcelain surfaces. Allow
Grout Release to cure for 6 - 12 hours before continuing with the
grouting procedure.
Residue Remover
To remove accumulated
Grout Release residue, use Miracle
Residue Remover as directed.
Cure Time
Grout Release will be dry to the touch in 1 - 3 hours and may be used
for normal foot traffic. Grout Release must sit for 6-12 hours before
grouting.
For optimum results the area should be kept dry and free from
staining materials for 72 hours.
MAINTENACE
For ongoing maintenance instructions please refer to Miracle
Sealants Care Guide. Refer to the Miracle Sealants Product
Recommendation Chart for specific product recommendations.
Storage
Store
Grout Release in the original container, properly sealed to avoid
contamination and solvent evaporation. Stored at 77°F (25°C), Grout
Release will have a shelf life of 12 months.
Technical Support
For additional technical support, contact Miracle Sealants
Company at 1-800-350-1901
Office Hours
Monday - Friday from 8:30 am - 5:00 pm PT.
1-800-350-1901 • Fax: [phone] website:
www.miraclesealants.com
Product Damaged During Transportation
If product is damaged during transportation contact Info Trac @
1-800-535-5053
Additional Product
Miracle Sealants Company offers a complete line of water & stain
repellents, sealers, cleaners, polishing compounds, diamond
abrasives, machinery and accessories for the tile, stone, concrete,
metal, fabric and carpet professional or do-it-yourself specialist.
WARRANTY & CAUTIONS
Warranty
Instructions are a condensed guide and should not be considered
complete. In the event of failure, the only obligation of Miracle
Sealants Company shall be to replace such products proven to be
defective. Before using, user shall determine the suitability of the
product for their intended use. User assumes all risks and liability
whatsoever in connection therein. Neither seller nor manufacturer
shall be liable for any injury or inability to use this product.
Caution
Grout Release contains combustible petroleum distillates. All solvents
must be considered toxic and must be used in a well ventilated area.
Good ventilation means that fresh air is flowing in such a way as to
feel a slight breeze. Open windows and use fans to circulate air.
Continue to ventilate until vapors are eliminated. Exposure to high
vapor concentration must be avoided. Inhaling the vapors can be
harmful. Keep away from heat and open flames. Avoid prolonged
contact with skin. Chemical resistant gloves should be worn at all
times. Keep small children and pets out of the area until product or
surface has thoroughly dried. Refer to the SDS for additional
information.
■
Interior & Exterior
Restrooms
■
■
■
Ceramic Tile
Marble
Slate
Brick
■
■
■
■
Porcelain Tile
Granite
Grout
Terrazzo
■
■
Special Features
Showers
Drive Ways
■
■
■
■
Easy-to-Use
Stain Resistant
Acid Resistant
Freeze/Thaw Resistant
■
■
■
■
Weather Resistant
Water Resistant
Non Yellowing
U.V. Transparent
■
■
■
■
Low Toxicity
Non Coating
Salt Resistant
Slip Resistant
■
■
PRODUCT DE SCRIPTION