Product Brochure

be scratched, stained or damaged when grouted with
sanded/colored grout.
Follow tile manufacturer/fabricator recommendations
and test a small area prior to use to determine
suitability. Not recommended for installations where
chemical resistance is required.
CLEAN UP: Follow cleanup process as specified by
grout manufacturer. Allow a minimum of 10 days to
cure or per grout manufacturer's instructions,
whichever is longer, before starting routine cleaning
(such as mopping).
PROTECTION: Protect the finished installation from
traffic or impact for at least 24 hours. Finished
installation should be free from traffic and impact for at
least 24 hours, from water immersion or freezing for 10
days or per grout manufacturer's instructions,
whichever is longer. Clean up spills immediately upon
occurrence. Do not use liquid abrasives. If a stain re-
mains after initial cleanup, follow the recommended
cleaning procedures provided at miraclesealants.com
or call 800 350-1901 Extension 3013 for
technical support.
CAUTIONS: Wear safety glasses when handling
this product. Wear gloves to prevent prolonged or
repeated contact.
FIRST AID: If swallowed: Do not induce vomiting. Seek
medical attention if symptoms develop. Skin Contact:
Wash with soap and water. Eye Contact: Flush with
water for 20 minutes. If vapors inhaled: This product
has a mild odor and no inhalation hazard is expected.
However, if any breathing discomfort is ever experi-
enced move person to fresh air and if symptoms
persist and do not improve for more than 2 minutes,
seek medical attention.
KEEP OUT OF REACH OF CHILDREN
CLEANING: Spills should be wiped up immediately
with a paper towel or cloth. If a stain remains, scrub the
grout surface with hot water and a nylon scrub pad or
soft bristle grout brush for up to one minute. Use a
clean sponge to remove the dirty solution, then rinse.
For stubborn grout stains on natural stone
installations:
1. Add 1-3 drops of dish soap to approximately 16
ounces of hot water. Let it sit for one minute or longer,
scrub with a nylon scrubbing pad for at least one
minute. Use a clean sponge to remove the dirty
solution, then rinse.
2. Use Miracle Sealants Tile & Stone Cleaner. Let it
sit for one minute or longer, scrub with a nylon
scrubbing pad for at least one minute. Use a clean
sponge to remove the dirty solution, then rinse.
3. Contact Technical Support for more specific instruc-
tions at: 1-800-350-1901 Ext. 3013 - Monday thru
Friday 8:30 AM – 5:00 PM PST
For stubborn grout stains on ceramic and
porcelain tile installations:
1. Add 1-3 drops of dish soap to approximately 16
ounces of hot water. Let it sit for one minute or longer,
then scrub with a nylon scrubbing pad for at least one
minute. Use a clean sponge to remove the dirty
solution, then rinse.
2. Use Miracle Sealants Tile & Stone Cleaner. Let it
sit for one minute or longer, scrub with a nylon
scrubbing pad for at least one minute. Use a clean
sponge to remove the dirty solution, then rinse.
3. Use Miracle Sealants Phosphoric Acidic Cleaner
(NOT FOR USE ON NATURAL STONE). Follow
dilution instructions and let it sit for one minute or
longer, scrub with a nylon scrubbing pad for at least
one minute. Use a clean sponge to remove the dirty
solution, then rinse.
4. If the stain still remains contact Technical Support for
more specific instructions at: 1-800-350-1901 Ext.
3013 - Monday thru Friday 8:30 AM – 5:00 PM PST
Note: Before using any cleaning product on tile or grout,
always test a small inconspicuous area and allow to dry
to ensure compatibility of the cleaner with the surface to
be cleaned.
LIFETIME LIMITED WARRANTY: Miracle Sealants
Company (MSC) offers a lifetime limited warranty on
this product when installed in accordance with MSC
printed specifications and applicable industry standards
and building codes. MSC warrants to the original owner
that the product will be free from manufacturing defects,
will resist stains and will not deteriorate under normal
use for the lifetime of the grout. This lifetime limited