Product Brochure

Miracle Grout Shield New & Improved is a specialty
sealer additive that mixes with sanded or non-sanded
cement grout instead of tap water to provide a stronger,
stain resistant grout installation. Perfect for interior and
exterior use. This product comes with a lifetime
warranty against stains.
(Do not exceed 200 RPM)
DIRECTIONS
Shake well before using.
24 oz. for 7 lb. Box of Sanded Grout =
1 - 24 oz. Container
24 oz. for 10 lb. Box of Sanded Grout =
1 - 24 oz. Container plus 2 - 10 ounces of water or
Miracle Grout Shield New & Improved
48 oz. for 10 lb. Bag Non-Sanded Grout =
2 - 24 oz. Containers
70 oz. for 25 lb. Bag of Sanded Grout =
1 - 70 oz. Container
48 oz. for 10 lb. Box Non-Sanded Grout =
1 - 70 oz. Container minus 22 oz.
Start by pouring approximately 3 quarters of the full
container of the Miracle Grout Shield New &
Improved additive into a clean mixing bucket. Slowly
add the entire bag of grout and thoroughly mix by hand
or with a slow speed drill mixer used at the lowest RPM
setting (Do not exceed 200 RPM). Mix until all grout has
been uniformly wetted into a paste and no dry grout
remains in the mixture. DO NOT OVERMIX.
Note – Some tile professionals may desire a particular
grout consistency. In this case, once the recommended
Miracle Grout Shield New & Improved has been
used, up to 2 ounces of clean cool water can be added
at a time until the desired consistency is achieved. For
best performance use 3 ounces of Miracle Grout
Shield New & Improved to 1 pound of cement grouts.
Mixture should be easy to spread but not pourable.
Grout Additive for
Ultimate Stain Protection
Grout that has too much liquid or is mixed at too high an
RPM (too fast) may have reduced performance and
repellency capabilities.
Let grout sit in mixing bucket for 10 minutes and then
mix again. Follow grout manufacturer’s instructions to
install grout. In order to maintain color consistency
across an entire installation, use the same liquid to
grout proportions when using multiple containers for the
same job.
Inspect and rework grout joints if necessary during final
cleaning. (Between 45 - 60 minutes).
For interior and exterior use.
COVERAGE: Follow grout manufacturer's published
coverage.
STORAGE: Store in a cool, dry location. Do not store in
direct sunlight.
SHELF LIFE: If unopened, 12 months from the date of
manufacture. Once opened, store any unused product in
a sealed container and use within 6 months.
SPECIAL NOTES: When grouting a porous tile or
natural stone with any cement grout, it is recommended
to use Miracle Sealants 511 Penetrating Sealers as a
grout release to help facilitate grout haze clean-up.
Avoid applying sealer to tile/stone edges as this may
interfere with proper grout bond.
Miracle Grout Shield New & Improved can be mixed
with any Portland cement or polymer modified grout .
LIMITATION – Not for use with epoxy, urethane, pre-mix
or cement grout that claims to have a stain repellent
ingredient.
For enhanced protection, Miracle 511 Penetrating
Sealers can be used to enhance stain repellency
after grout has fully cured per the manufacturers’
recommendation.
If enhancing tile, stone and/or grout, use Miracle
Sealants 511 Seal & Enhance as certain tile surfaces,
including glazed ceramic tile, marble, stone and
agglomerate tile can