User guide

11
6. Reversed Inlet Supplies Only:
a) Using a suitable tool, carefully remove the
plug cap from the centre of sealing plug
to reveal keyway.
b) Remove the sealing plug using the ‘O’ key
(supplied) or a 12 mm hexagonal key.
c) Unscrew the outlet nipple using the
‘O’ key (supplied) or a 12 mm hexagonal
key.
Note! On Mira Minilite Eco models
carefully remove the ow regulator from
the outlet nipple rst.
d) Ret the sealing plug and outlet nipple in
the opposite outlets and tighten.
Note! Make sure that the ‘O’ seals are
correctly tted.
Note! On Mira Minilite Eco models ret
the ow regulator.
e) Rotate the mixer 180°.
f) The control knob(s) will have to be
realigned, this can be completed in
section: ‘Commissioning’.
Plug Cap
Sealing Plug
‘O’ Seal
7. Remove the backplate from the mixer by
loosening the grubscrews with a 2.5 mm
hexagonal key (supplied).
8. Secure the backplate to the wall using the
screws (supplied).
Screw
Backplate