Tarkington © Power Button © LCD Screen © DOWN Button: Decrease © UP Button: Increase © Antenna Connector O MODE Button @ Volumes Limiter Indicator © Frequency Band @ Channel Display @ Power / Channel Button Il. Operating Instructions 1. MT-24 / MT-58 : (A) Press and hold the Power Button @ until power on and the LCD Screen lightens. (B) CH (CHANNEL) ID (ID CODE): {1) Crass the MODE button and the numeric channel blinks. Now press the UP/DOWN button to change. 93.
(2) Press the MODE button again and the numeric ID code blinks. Now press the UP/DOWN bunion to change, The blinks wil stop to dents the change Is saved. ©2-03 02 grep rE 2. MT-81: {A) Press and hold the Power/Channel Button {© until power on and the LED Screen lightens, {B) Press and hold the Power/Channel Bunion again and the LED Screen dims to denote power off. {C) Press and release the Power/Channel Button {@ to select the desired channel. 16 delectable channels are available.
2. Every transmitter module has a different design and has to be used with the paired system fo ensure the characteristics. 3. Module Insertion: {A) Remove the front cover plate. {B) Insert the module gently into the sot horizontally. {C) Fasten the panel with the attached two screws, 4. Frequency band selection. ISM band transmitter sends the signal to the caregiver module and then transmits to another receiver module by the UHF band Interlinking transmitter module.
ing Transmitting MT-24 : TX Mic GHz MT-24 Interlinking Sachs Rx Module Transmitter 24 GHz Band I 24 GHz RX Module MT-68 : TX Mic GHz MT-52 Interlinking Pacheco Module Transmit or 8 tent [TREE mga [| | aed i= PEPPER) | lee > vu [Ee] Band 5.8GHz RX Modular. Notes 1. Refer to actual product In the event of product description discrepancy. 2. Frequency range, RF output power and maximum deviation comply with the regulations of different countries. AR rps scarves Do Tk apy WADE prior paper of UPD.
