MR-90a MIPRO Electronics Co., Ltd. Headquarters: 814 Pei-Kang Road, Chiayi, 60096, Taiwan. Web: www.mipro.com.tw E-mail: mipro@mipro.com.
WARNING ! IMPORTANT SAFETY INSTRUCTIONS ! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Professional ENG Receiver Introduction The MIPRO MR-90a is a portable wireless, receiver specifically designed for professional camcorder applications. —Matched with any ACT transmitter the MR90a eliminates the need for microphone cables during recording. —The MR-90a not only allows a closer combination of video and audio so that a more natural sound can be recorded, but it also ensures safer and more agile operation.
Professional ENG Receiver Included Accessories: Anetenna x2 Antenna Protective Cover Signal output cables x2 DC cable x1 AC to DC Adaptor x1 Power Cable x1 User Guide x1 ＊Signal output cable lengths: 14cm and 95cm ＊Optional MJ-90 DC cable for SONY camcorders. ＊Optional MR-90B Battery Pack. (Accessory) - 3 - Professional ENG Receiver Functions The MR-90a compact, miniature receiver utilizes the UHF band, PLL synthesized technology and true diversity design.
Professional ENG Receiver Features PART NAMES AND FUNCTIONS 1. Waterproof, rugged, aluminum case, lightweight and ultrathin. 2. Output interface module can be easily exchanged to work with different camcorders, active speakers and other audio equipment. 3. Professional ENG Receiver UHF-band, PLL synthesized, dual-antenna, and true diversity reception. 4. In each 24MHz bandwidth, 100 pre-programmed frequencies can be auto-scanned to locked on an open, interference-free frequency. 5.
Professional ENG Receiver LCD Display Operating Instructions Professional ENG Receiver (1) GR-- --CH: Display/change the GROUP and CHANNEL setup. LCD panel with all indicators displayed Turn on the power, The LCD displays the current GROUP and CHANNEL. RF AF RF A RF A AF B BT AF B BT A B BT Set-up for changing CHANNEL. Set-up for changing GROUP. RF A RF A AF B BT AF B BT Button Names and Operating Instructions MENU: power on/off and function menu.
Professional ENG Receiver Professional ENG Receiver B. "CHANNEL" Set-up Instructions MENU GR-- - -CH SCAN▼ DOWN▲ MENU (2) FREQ: Display the current frequency. EXIT SAVE a. Similarly, briefly press the "MENU" button until the display shows GH-- --CH. Press the "SCAN▼" button. The two-digit number indicating the current frequency starts to flash in the lower right corner of the display. Press the "SCAN▼" button again. The receiver scans and stops on an interference-free frequency, if available.
Professional ENG Receiver (3) SQUELCH: Display/change the SQUELCH setting. Professional ENG Receiver (4) AF: Switches between MIC or LINE. Press the "MENU" button until "AF" is displayed Press the "MENU" button until "SQUELCH" is displayed RF A RF A RF A RF A AF B BT AF B BT AF B BT AF B BT Press UP▲ or DOWN▼ to select. Press Up▲ to increment by 5 or press DOWN▼ to decrement by 5. RF A RF A AF B BT AF B BT Press UP▲ or DOWN▼ to select. Press UP▲ or DOWN▼ to change the setting.
Professional ENG Receiver (5) BATT: Display battery level on the receiver panel. Professional ENG Receiver (6) LOCK: The operation instruction for lock and unlock setup. Press the "MENU" button until "SQUELCH" is displayed Indicates battery power is on. RF AF A RF B BT AF A AF B BT RF A RF A AF B BT AF B BT A B BT Indicates current battery voltage level. RF Press the "MENU" button until "LOCK" Is displayed. Press UP▲ or DOWN▼ to select. A.
Professional ENG Receiver Installation Using the ACT function RF A AF B BT Professional ENG Receiver Plug into built-in slot on SONY Betacam®-series camcorders. A. Button Operation: ACT ACT EXIT B. Operating Instructions: a. On the LCD display, briefly press "ACT" button. "ACT" flashes on the display. b. Place the transmitter within 20cmof the receiver, and position the ACT signal indicator of the transmitter toward the "ACT" button on the receiver panel. See below. c.
Professional ENG Receiver Professional ENG Receiver Connect to active speaker via exclusive accessories.
