MA-808
Electronics Co., Ltd. Head office: 814, Pei-Kang Road, Chiayi, 60096, Taiwan. Taipei office: 5, Lane 118, Sung-teh Road, 10075, Taipei, Taiwan. Web-http: //www.mipro.com.tw E-mail: mipro@mipro.com.
IMPORTANT SAFETY INSTRUCTION 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Disposal Dispose the unusable device according to valid regulations. Disposal of spent batteries/accumulators You are required by law to return all spent batteries. Disposing of used batteries with domestic waste is prohibited! Batteries / NiCad cells containing toxins are marked by accompanying symbols that refer to the prohibition of disposal with domestic waste. The designations for the decisive heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead.
Contents Operating Manual Operation of Wireless Amplifier System 1. Parts Names And Functions 2-3 2. Control Panel 4 3. Operation of Transmitters Storage 6 4. Replacing Batteries 7 5. Selection and installation of wireless receiver modules: 9 6. Optional wireless transmitter and receiver module: 12 7. Additional Installation of CDM-3 Player: 15 8. Operation and Cautions : 16 9. Specifications : 16 Accessories for Hand Held Microphone 1. Parts Names And Functions 17 2.
WIRELESS AMPLIFIER Operating Manual Thank you for choosing a MIPRO MA-808 series Wireless Portable Public Address System. Please take time to read these instructions carefully so that you can achieve the best performance from the system. The MA-808 is the latest wireless amplifier model from MIPRO, an industry leader in portable wireless PA systems. This rugged, bi-amplified unit was designed with versatility in mind.
WIRELESS AMPLIFIER Operating Manual 1. Parts Names And Functions Front 1 Retractable Carry Handle 2 3 Fixed Handle Transmitters Storage 4 reble Speaker 5 Bass Speaker 6 Speaker Grille 7 Tripod Pit (Fig.1) (1) Retractable Carry Handle push the handle upward from the space on the rear center to retrieve retractable handle. Push downward to store the retractable handle. (2) Fixed Handle (3) Transmitters Storage A handy storage compartment for your hand held microphone transmitters.
WIRELESS AMPLIFIER Operating Manual Back (Optional) MTM-90 Wireless transmitter MRM-72 Wireless receiver modules CDM-3 Player (Optional) Receiver Modules 8 DC Power Switch 9 Battery Meter Indicators (8) (9) (10) (11) (12) (13) (14) (15) (16) 10 Control Panel 11 Passive Extension Speaker Scoket 12 Heat Sink 13 AC Input Socket 14 15 DC Input Jack Battery holder 16 Trolley Wheels (Fig.2) DC Power Switch: Turns DC power on/off of the unit. The indicator glows when you turn the power on.
WIRELESS AMPLIFIER Operating Manual Control Panel MASTER A9 LINE MIC ON A10 OFF VOICE PRIORITY OFF MAX ECHO ON LOW HIGH OFF TONE A1 VOLUME A2 A3 LINE OUT LINE IN A5 A6 A4 MIC IN EXT.SP. SW. A7 A8 (Fig.3) (A1) Tone Control : Turn counterclockwise to increase bass or turn clockwise to increase treble. Set at 12 o'clock for a flat response. (A2) Master Volume Control : Simultaneously adjusts the volume of all mixed audio inputs.
WIRELESS AMPLIFIER Operating Manual Connection For External Audio Sources : MASTER LINE MIC ON OFF VOICE PRIORITY OFF MAX ECHO ON LOW HIGH OFF TONE VOLUME LINE OUT Mixer Amplifier Cassette Recorder MP3 PLAYER CD PLAYER I-POD LINE IN MIC IN Cable Mic. (XLR Connector) Cable no: 2FA030 AVAILABLE CABLE FROM MIPRO: MIPRO NO: 2FA072 MIPRO NO: 2FA070 3.5 6.3 RCA 3.5 -5- EXT.SP. SW.
WIRELESS AMPLIFIER Operating Manual 3. Operation of Transmitters Storage 1. Two handheld transmitters, or two bodypack transmitters, or one handheld transmitter and one bodypack transmitter can be stored at MA-808. 2. Steps of storing transmitters. A. Open the lid. B. Put the transmitters downward to position. C. Return the lid back by hand.
WIRELESS AMPLIFIER Operating Manual 4. Replacing Batteries A. Dismount the screws to remove battery holder. (see fig. 2-1) B. To remove batteries, batteries have to maintain parallel level. (see fig. 2-2) C. Re-connect the wires to new batteries according to wiring diagram below. (see fig. 2-3) D. After putting battery holder in place, tighten up the screws. (see fig. 2-4) (fig. 2-1) (fig. 2-2) (fig. 2-3) (Battery wiring diagram) black wire red wire red wire black wire (fig.
WIRELESS AMPLIFIER Operating Manual Power Usage Instruction: General Summary 1. 2. 3. How to use AC power input. 1. 2. 3. How to use DC power input. 1. 2. 3. 4. 5. Two built-in series connection lead-acid batteries with model models WP 4.5-12 are used. When the batteries are fully charged, the unit can operated continuously for approximate 7~8 hours in standby mode (CD player and two receivers are turned on); 6~7 hours for audio and 5~6 hours for music.
WIRELESS AMPLIFIER Operating Manual 5. Selection and installation of wireless receiver modules: 1. Each MA-708 can be installed 2 wireless receiver modules, they can be optionally selected according to different applications. 2. Steps of installation or replacement of wireless receiver modules: A. Unscrew the screws from the filter panel. B. To withdraw the old receiver module by using the screw driver with flat head. C. Inter the receiver module into the empty slot. D.
WIRELESS AMPLIFIER Operating Manual (1) Operating a Wireless Microphone Receiver Module A5 A6 A7 A8 RF CHANNEL NOISE SCAN - + ACT SENSITIVITY AF VOLUME A4 A3 A2 A1 (A1) Receiver Power Switch/Volume Control : Turns on/off of receiver module. After power on, AF LED will flash. Turns knob clockwise to turn up volume. (A2) Audio Signal Level Indicator: Indicate the audio signal level.
WIRELESS AMPLIFIER Operating Manual (b) Manual Frequency Set-up: Holding down the SCAN button (B5) for 1 second. Release the button when numeric LED (B6) flashes. It will flash a total of 6 times. To select any of the 16 frequencies in orderly format, press the SCAN button and hold until the desired frequency is selected. This frequency will automatically be saved/locked. a) Press and hold "SCAN" button for 1 second. frequency will change every two flashes.
WIRELESS AMPLIFIER Operating Manual 6. Optional wireless transmitter and receiver module: Users have options to add the MTM-90 wireless transmitter or MRM-72 receiver module if they have the needs. (1) Additional installation of MTM-90 interlinking transmitter: 1.
WIRELESS AMPLIFIER Operating Manual 4 5 Press and hold the Channel-Selecting button (D3) for around 2 seconds until channel LED display (D2) starts flashing. If button is not pressed again when Channel LED flashes 6 times, the channel appearing in Channel Display is automatically saved and set. The volume limitation Indicator won't be lit under the normal audio volume. If the audio input exceeds the set limitations, volume restriction control will activate and the indicator will lit.
WIRELESS AMPLIFIER Operating Manual (2) Additional installation of MRM-72 receiver module: 1. Steps of MRM-70 installation as following: 1. Remove the fixed spare cover from the above of MA-708 operation panel. 2. Push the MRM-72 module in horizontal direction into the spare installation slot. 3. Fasten the front panel of module with screws. 4. Furthermore to have the optional MRM-70 wireless receiver module installed into the slot of MRM-72. 5.
WIRELESS AMPLIFIER Operating Manual 7. Additional Installation of CDM-3 Player: 1. Steps of CDM-3 Player Installation as Following: A. Remove the cover plate (as shown in fig. 3-1) B. Connect the linking wire to the CD player's connecting socket (as shown in fig. 3-2) C. Gently push the CD player in to position and tighten accordingly (as shown in fig. 3-3) (fig. 3-1) 2. (fig. 3-2) (fig. 3-3) Operations of CDM-3 Player: Please refer to enclosed manual in the carton.
WIRELESS AMPLIFIER Operating Manual 8. Operation and Cautions : 1. Minimized all the volumes before powering on. 2. Each audio input is accepted through amplifier and its volume can be controlled separately. 3. Each audio input can be broadcasted and recorded at the same time. 4. MIPRO's wireless microphone systems are high-performance and easy to set-up and use. 5. Read "Operation Method of Wireless Microphones" manual for correct operations of wireless microphones. 6.
WIRELESS AMPLIFIER Operating Manual 9. Specifications : Specifications Item 1. Power Output 250-watt 2. T. H. D. < 0.1 % 3. Frequency Response 50Hz ~ 18 KHz 4. 3 dB Treble Speaker 1.5" titanium compression driver Bass Speaker 10" Neodymium cone driver 5. Receiver Module Up to 2 optional UHF receiver modules may be fitted to a MA-808. Please consult with your local supplier for frequencies 6.
HANDHELD WIRELESS MICROPHONE Operating Manual 1. Parts Names And Functions ACT-707HE 1 2 3 4 5 6 7 8 ACT-3H ACT-3H UHF 1 2 3 4 5 6 7 8 (Fig.1) 1. Capsule module: Consists of capsule unit and grille which protects capsule units, eliminates "POP" noise, and prevents microphone from rolling on the table top. 2. Battery Status Indicator: Indicates power on / off and the battery status. When the power switch is turned ON, the red LEDs indicator flashes briefly, indicating normal battery status.
HANDHELD WIRELESS MICROPHONE Operating Manual 2. Battery Insertion ACT-707HE 1. Unscrew battery cap in a counter-clockwise direction (6). 2. Insert a 9V battery into the battery compartment according to the correct polarity as shown in Fig.2. The moment the battery touches the terminals, the indicator will flash briefly (6). This means the polarity is correct. However, if no flash occurs, this indicates wrong insertion or that the battery life is over.
HANDHELD WIRELESS MICROPHONE Operating Manual 3. Operating Instructions 1. When microphone is switched on: At the moment of the power is switched on, the indicator will flash briefly indicating normal operation. (a) When power on: SIGNAL LED indicator of receiver glows. (b) After power on: More LED indicators shows received signal strength is strong. (c) During Usage: AUDIO LED displays received AF level from the microphone.
BODYPACK TRANSMITTER Operating Manual 1. Parts Names And Functions ACT-707TE ACT-3T 1 9 10 2 1 9 2 3 3 4 4 5 6 7 8 10 5 6 7 8 (Fig. 1) 1. AF Input Jack: Connects to a lavaliere or headset microphone. (See 5 ways of connection on AF Input Connections) 2. Power Switch: Switch to ON position for operation. Switch to OFF position when not in use. 3. Battery Status Indicator: Indicates the power on / off and battery status.
BODYPACK TRANSMITTER Operating Manual 10.Belt clip: allow user to hold transmitter on the belt. Allow various angel adjustment for the comfort of operation. When not in use, use a Philip (-) screw drive to uninstall. (Fig. 2) 2. Operating Instructions 1. To adjust volume (6), GT/MT Switch (7), simply push down both snap locks on the sides of battery cover and flip it backwards to expose the adjustment panel. 2. The LED indicator flashes briefly when power on indicating normal battery status.
BODYPACK TRANSMITTER Operating Manual 3. AF 4-pin Input Connection Method (1) 2-Wire Electret Condenser Microphone Capsule 4 1 BATT. LOW 2 4 1 3 2 3 4 (2) 3-Wire Electret Condenser Microphone Capsule PIN 1 SHIELD 2 AUDIO 4 1 3 BIAS 3 2 4 (3) Dynamic Microphone 2 1 SHIELD PIN 1 3 2 AUDIO 4 1 3 2 3 4 (4) Electric Guitar PIN 1 SHIELD 2 AUDIO 4 1 3 3 2 4 (5) Line-in (Impedance 8K ATT.
BODYPACK TRANSMITTER Operating Manual 4. Battery Installation ACT-707TE 1. Pushing down both snap-locks on the sides of battery cover to open battery cover. (Fig. 4). 2. Insert a 9V battery into the battery compartment observing the correct polarity as shown in Fig. 4). Then push up to close the battery compartment as shown in Fig. 4-1). (Fig. 4) (Fig. 4-1) ACT-3T 1. Pushing down both snap locks on the sides of battery cover to open battery cover. Take out the batteries. Fig. 5). 2. Insert two 1.
NOTE
