User guide

FAQ - PORTABLE PA
Q: Why is my MA-707 not recharging (indicator is not flashing) when plugged into an
AC outlet?
A1: Ensure AC Power button is pressed in (next to the MRM-70 receiver module slot). An un-
pressed button (out) will prevent recharging of the battery.
A2: The rechargeable battery life has ended. Replaced with new, fresh rechargeable battery.
Q: How to adjust for optimal sound volume?
A: If the portable system has both Master & Microphone volumes, we recommend turning the
Master volume to about 3pm (clockwise) first and about 1~2pm (clockwise) for Microphone or
other volumes.
Q: How to prevent and minimize the annoying feedback?
A1: Do not stand directly in front of the speakers; keep mics away from speakers.
A2: Avoid pointing microphone towards the speakers.
A3: The microphones should be behind the speakers wherever possible.
A4: Locate the portable PA between the crowd and the presenters and facing the crowd.
A5: Turn down the sound level coming out of the portable PA / speakers if necessary.
A6: Place the speakers above the head of the crowd.
Q: What if I need more power to cover a larger crowd?
A: Two or more portables can be used with one wireless microphone transmitter. Ascertain that
the receiver frequency in each portable coincides with the wireless microphone.
Q: Can I play music through the systems?
A: Yes. All MIPRO portables have auxiliary inputs (3.5mm min-jack, RCA or 1/4”phone), which
will accept input from an external iPod, MP3, CD, cassette, VCR, DVD players. As well,
modular CD players can be inserted into most models.
TROUBLESHOOTING-WIRELESS MICROPHONE SYSTEMS
No Sound From Speaker
Distortion or Unwanted
Noise Bursts
Sound Dropouts
Master or receiver volume
turned down
Transmitter or receiver
switch is turned off
Headset or lavalier
microphone is not plugged
into bodypack transmitter
Interference
Noise Indicator is lit
Out of operating range
Obstructions between the
receiver and transmitter
Weak Transmitter Battery
Interference
Transmitter battery is
low or no battery inside
Receiver and transmitter
have different frequencies
POSSIBLE CAUSEPROBLEM
Turn transmitter or receiver
switch on
Plug headset or lavalier
microphone into bodypack
transmitter
Remove nearby sources of RF
interference (computers,
amplifiers, karaoke machines,
digital effects, CD players, etc)
Adjust “Sensitivity” on receiver
Move transmitter closer
to receiver
Remove obstructions or
reposition
Replace Transmitter Battery
Change Receiver & Transmitter
frequencies
Adjust volumes
Replace or insert new battery
See “Set-up Receiver &
Transmitter Frequencies”
section
Line-of-sight between receiver
& transmitter
See “Set-up Receiver &
Transmitter Frequencies” section
If problem persists, change
Receiver & Transmitter
frequencies.
See “Set-up Receiver &
Transmitter Frequencies”
section
SOLUTION
12
13
PORTABLE WIRELESS PA SYSTEM PORTABLE WIRELESS PA SYSTEM