User guide

Personal Wireless Public Address System Personal Wireless Public Address System

! Lay the PA system on a flat surface. Power off and gently remove USB from USB

port, if needed.

! Slide the battery cover release latch to OPEN position so battery cover can be

opened and removed.

! The battery pack is stored inside the compartment slot. Pull out the battery gently

and remove it completely by detaching the connecting pins.

! Insert the replacement battery pack. Ascertain the connecting pins are connected

firmly before inserting. Carefully slide the battery back into the compartment slot.

! Slide the shoulder strap into the groove located inside top of the compartment

cover.

! Slide and hold the battery cover release latch to OPEN position again with one hand,

then using the other hand, push the battery cover back in place securely.

WARNING:

Never short-circuit the battery pack by either accidentally or intentionally bringing the

battery terminals in contact with another conductive object. Never expose a battery

pack to abnormal shock, vibration or pressure. Failure to observe the foregoing could

result in serious injury.

NOTE:

Dispose of the used battery according to local environmental laws and guidelines.

Changing the Rechargeable Battery

OPEN

OPE