Body pack Transmitters I. Parts Name S000 20 9008 & a9 AA Battery (left); Rechargeable Battery (right) © 4-Pin Microphone Input Jack © Mute button © Transmitting Antenna © Housing © LCD Panel © SET button @ MODE button © Power Switch © ACT Sync Window © Battery Compartment & Battery Cover & Remote control mute connector ® Reversible Alt Clip © Battery Charging Contact {Rechargeable) 1 Al Fights reserved. Bo rok copy forward wih pro promos of POMP. ‘Spectators charge ind hci.
Buyback Transmits rs & Battery protection circuit reset button {ACT-70TCIACT-52TCIACT-32TC Rechargeable) af Standard ~~ Reverse II. 4-Pin Microphone Input Jack Conn action 1. Before muting on the power, connect the Input signal source fo the microphone Input jacket first to avoid open-circuit induced Noels, 2. Align and fasten the connector clockwise for a secured fit. Capsule Connector 2 AT nightdress. Bo rok copy forward wih pro promos of POMP. Specialization and ean mie 1o change wind hic.
Buyback Transmitters Ill. Operating Instructions 1. Power On/Off: Press & hold the power button for twa seconds to power on or power off the device. The LED lights on after the device Is powered on. 2. Battery label indicators: Recommend charging when single red Indicator remains. Power shutdown automatically wham battery voltage Is too low. RR 100% 76% inboard) indent 3 Al Fights reserved. Bo rok copy or forward caribou pro promos of POMP. ‘Spectators charge ind hci.
Buyback Transmits rs : 1. Power ON/OFF: {A) Press and hold the power bullion for two ‘seconds to power on or power off the device. (B) The LED screen display OFF... during paws ring oft. 2. Battery level indicators: Recommend charging onc level falls to 10% and the screen flashes. Device will power off automatically with an OFF message acne power level falls 100 low. Ec=LL0 100% LCD Screen: © D Functions & © © Displays Parameters © Battery Level Mister 4. Press MODE bunion @ to access all the functions. 5.
Buyback Transmitters Fetlock MUTE Mode RF Power 8. Group (GRP) / Channel (CH) / Frequency {FREQ.) are synced from receiver and cannot be changed. 09-02 | (Multichannel) 754000 | (FREQUENCY) 7. AF Gain Set ling: (A) AF Gain can ba changed from 12dB ~ -124B, In 608 wisps. (8) Proof MODE bunion to 25osa8 AF GAIN parameter. Press SET button to sangs. To ‘save, prose MODE bunion or unt flashing stops.
Buyback Transmits rs 8. RF Power Ratting: (A) RF Po war can be changed to RF-HI or RE-LOW. (8) Cross MODE button to access RF POWER parameter, raga SET button, tha parameters stout flashing. Press SET bunion again, the parameter wil change circularly. Press MODE button fo save of the parameter saves ‘automatically when flashing stops. REA 9. MUTE MODE Setting: (A) MUTE MODE can be changed io MANUAL or DISABLE. (8) Press MODE button to access MUTE MODE spammer. Press SET bunion, the parameters start fishing.
Buyback Transmitters 10. Lock Setting: (A) LOCK can be changed to LOCK or UNLOCK. (8) Pros MODE bunion to access LOCK parameter. Prose SET button, tha parameters start flashing, Press SET bunion again, the parameter will change circularly. Pres MODE. button to save of the parameter saves ‘automatically when flashing stop. {C) LOCKED mods Indicates al the parameters ‘cannot be changed and power bunion cannot work. Press SET bunion and the screen displays LOCKED.
Buyback Transmits rs IV. MUTE setting 1. Press MUTE button to enter MUTE mode. 2. Press MODE, SET bunions to access parameters. Re tums to mute mode when button is not pressed for 5 seconds. 3. Press MUTE button to disable MUTE mode. 4. MUTE displays for 1 second and then rectums to main screen. 5. MUTE button acts only under MANUAL Prose MODE ‘Shown for 1 second SET buttons #9 Back tn Coma Loren 8. Re mate Control Mute Connector: 3.
Buyback Transmitters 7. Remote Mute Switch (Optional): Plug M-70 Remote Mute Switch Into Remote Control Mute Connector @ before prows on. Plug Button V. AA Battery Insertion and Replacement . Press the side hooks to open battery compartment. Remove the battery carefully. 2. Insert two AA sized batteries according to correct polarity. 3. Power off to conserve power. Remove the battery when It will not be used for extended periods of time. 9 Al Fights reserved. Bo ok copy forward wih pro promos of POMP.
Buyback Transmits rs VI. Rechargeable Battery Insertion and Replacement 1. Press the side hooks to open battery compartment. Remove the battery carefully. 2. Insert one 18500 type Ii according to comet polarity. 3. Check battery polarity was inserted co I battery power Is sufficient but unable to tum on the transmitter. Battery protection circuit ia activated if comet battery polarity.
Buyback Transmitters mw [505 8|@ Battery protection circuit reset button 1 18500 Li-ion + {D) Power off to conserve battery power. trey wh ofl nit ba med or extant periods of ime. {E) We recommend transmitter to be recharged directly In the docking battery charger. VII. Transmitter Battery Chargers (optional) Transmitter(s) can bs Inserted Into MP-8 single docking or dual-sacking battery chargers. Body pack transmitter recharged in MP-8 Ill. Notes 1.
