Operating instructions

(a)ThissystemincorporatesanadvancedPLL
synthesizedoscillatordesignandisreprogrammed
with16userselectablefrequencies.
-3- -4-
a) b)
SCAN
SENSITIVITY
+
NOISE
AF
RFCHANNEL
ACT
-
VOLUME
SCAN
SENSITIVITY
+
NOISE
AF
RFCHANNEL
ACT
-
VOLUME
c) d)
SCAN
SENSITIVITY
+
NOISE
AF
RFCHANNEL
ACT
-
VOLUME
SCAN
SENSITIVITY
+
NOISE
AF
RFCHANNEL
ACT
-
VOLUME
(b)ManualFrequencySet-up:HolddowntheSCAN
button(5)for1second.Releasethebuttonwhen
thenumericLED(6)flashes.Itwillflashatotalof6
times.Tomanuallyselectanyofthe16
preprogrammedfrequencies,presstheSCAN
buttonandholditdownuntiltherequiredfrequency
isselected.Thisfrequencywillthenautomaticallybe
saved/locked.
SCAN
SENSITIVITY
+
NOISE
AF
RFCHANNEL
ACT
-
VOLUME
SCAN
SENSITIVITY
+
NOISE
AF
RFCHANNEL
ACT
-
VOLUME
SCAN
SENSITIVITY
+
NOISE
AF
RFCHANNEL
ACT
-
VOLUME
SCAN
SENSITIVITY
+
NOISE
AF
RFCHANNEL
ACT
-
VOLUME
a) b)
c) d)
2.FREQUENCYAGILEOPERATION
(a)AutoScanningFrequencySet-up:Holddownthe
SCANbutton(5)for1second.Releasethebutton
whenthenumericLED(6)flashes.Itwillflashatotal
of6times.ToactivatetheAutoScanfunction,press
theSCANbuttononceduringthe6flashsequence.
Anopenfrequencywillautomaticallybe
saved/locked.*NotethattheAutoScanfunction
worksonlyifaccessedwhiletheLEDisflashing.
Press"SCAN"buttonandhold,
frequencywillchangeeverytwoflashes.
LEDdisplayflashes.
Pressandhold"SCAN"button
for1second.
Whendoneitwillautosaved/locked.
(3)Changethechannelwhen:
DIVERSITYRECEIVERMODULE DIVERSITYRECEIVERMODULE
(1)Overview:
Whendoneitwillautosaved/locked.
LEDdisplayflashes.Pressandhold"SCAN"button
for1second.
Press"SCAN"buttonagainandrelease
willautoscanforanopenfrequency.
(2)SelectingaFrequency:
(a)Theexistingchannelisencounteringinterference.
(b)Youwishtoselectdifferentchannelsformultiple
systemapplications.
To pair up the handheld mic, ACT707HE with the receiver, follow the steps above but instead of haveing the
open battery door facing the MRM70 receiver, point the heel or bottom of the mic towards the front of the
MRM70 receiver. You will see the same activity as you did when pairing the ACT707TE bodypack mic/transmitter.
Please note; if you have more than 1 wireless receciver in your system, and they are on the samechannel
band, (Both receivers are 6A, or 6B, or 6C) they must be on different channels. e.g. If you have 2 MRM706A
receivers in your MA705PA, or MA707PA, etc, and if they are both set to channel 2, you will have many
symptoms of malfunctioning wireless operation. It would be recomended to set them for different channels,
at least 2 channels apart. e.g. your first MRM706A receiver set to channel 2, and your second MRM70
receiver set to channel 4 or higher.