Owner's manual

!
EIA standard single-channel in 19” 1/2-rack unit size.
!
97 UHF channels. Can be programmed, installed and used in up to 97 different rooms.
!
Diversity reception for extended and reliable transmission.
!
ACT technology automatically synchronizes frequency between transmitter and receiver.
!
Output level and dynamic range are accurately pre-adjusted to equal the microphone
capsule's sensitivity, thus ensuring optimal performance of the system.
!
Detachable 100~240V AC auto-switching power supply.
!
Ideal for teaching professionals and presenters in multiple classrooms, lecture halls and
similar environments.
!
Featuring Industry's only all-in-one, versatile MT-101ACT transmitter microphone.
!
Compact, ultra-lightweight design and powered via rechargeable or disposable alkaline
batteries.
!
Once programmed, Same MT-101ACT transmitter microphone can be used in up to 97
different rooms.
!
Power on/off and volume loudness can be wirelessly remote controlled.
!
MT-101ACT can be a handheld or worn as a neck lanyard for hands-free operation with
an external headset microphone.
!
Built-in 3.5mm(1/8”) mini-jack line-input accepts other audio sources
(CD/iPodMP3/tape/mini-disc/computer) for amplification.
!
Amazing 24 operating hours per fast charge.
KEY FEATURE AND BENEFITS (ACT-101 Receiver)
KEY FEATURE AND BENEFITS
(MT-101ACT Wireless IR Remote-Control Transmitter)
2
3
2
3 4
5
6
ACT-101
Wireless Receiver
EXTEND BUILT-IN
IR MODE
SIGNALACT
RF AF
1
1
2
3
4
5
6
Front Display Panel
PART NAMES AND FUNCTIONS
ACT Port Indicator Switch: Red indicator does not illuminate when receiver is
plugged-in and pressed. Red indicator illuminates only when IR signal is received
successfully by the MT-101ACT remote transmitter microphone. Red indicator
illuminates denote receiver is now turned on
Note: This is not a power on & off switch. Always leave switch pressed upward. ACT
Port and MT-101ACT transmitter microphone cannot remote, function and use in
pressed downward position.
ACT Port:
transmitter.
RF Indicator: Indicates RF signal strengths from transmitter.
AF Indicator: Indicates audio signal strengths from transmitter.
EXTEND Socket: RJ-11 network cable connection to an external receiver for an
improved IR signal reception. Switch to EXTEND if connected.
IR MODE: To improve IR signal reception for ACT port. Factory preset at BUILT-IN.
Switch to EXTEND if connected externally.
Receive signal to turn on (and off) receiver and sync frequency to
(Figure 1)
Wireless IR Remote Control ReceiverWireless IR Remote Control Receiver