ACT-101 / MT-101 ACT WIRELESS IR REMOTE CONTROL SYSTEM User Guide MIPRO Electronics Co., Ltd. Headquarters: 814 Pei-Kang Road, Chiayi, 60096, Taiwan. Web: www.mipro.com.tw E-mail: mipro@mipro.com.
WARNING ! IMPORTANT SAFETY INSTRUCTIONS ! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Contents Wireless IR Remote Control Receiver PRODUCT OVERVIEW WIRELESS IR REMOTE CONTROL SYSTEM PRODUCT OVERVIEW 1 KEY FEATURE AND BENEFITS 2 PART NAMES AND FUNCTIONS--ACT-101 3 RECEIVER INSTALLATION 6 RACK-MOUNT RECEIVER INSTALLATION 7 OPERATION 8 PART NAMES AND FUNCTIONS--MT-101ACT Thank you for choosing MIPRO wireless IR remote receiver system. Please read this user guide thoroughly to ensure the system is operated correctly to maintain optimal performance.
Wireless IR Remote Control Receiver Wireless IR Remote Control Receiver KEY FEATURE AND BENEFITS (ACT-101 Receiver) PART NAMES AND FUNCTIONS ! EIA standard single-channel in 19” 1/2-rack unit size. Front Display Panel ! 97 UHF channels. Can be programmed, installed and used in up to 97 different rooms. ! Diversity reception for extended and reliable transmission. ! ACT technology automatically synchronizes frequency between transmitter and receiver.
Wireless IR Remote Control Receiver ACT-101 External ACT Port Receiver PART NAMES AND FUNCTIONS PART NAMES AND FUNCTIONS Rear Panel Front Panel LEVEL ANT.B + - CE 7 8 -6dB 9 0dB 10 SQ ANT.A POWER ACT EXTEND 13 14 15 ACT-101 +10dB 11 12 (Figure 2) (Figure 3) 7 DC Input Jack: For 12V DC power input connection. Connects center pole to positive voltage. 13 POWER Indicator: Indicates power status. An illuminated indicator denotes receiver has received IR signal and now turned on.
Wireless IR Remote Control Receiver Wireless IR Remote Control Receiver RECEIVER INSTALLATION RACK-MOUNT RECEIVER INSTALLATION An optional MIPRO FB-11 rack-mount brackets needs to be installed to be fitted into an EIA standard 19” rack case. Illustrated in Figure 5. + LEVEL SQ - ACT CE -6dB 0dB SIGNAL RF +10dB IR MODE AF ACT-101 Wireless Receiver EXTEND ACT BUILT-IN SIGNAL RF IR MODE AF ACT-101 Wireless Receiver (Figure 4) EXTEND BUILT-IN (Figure 5) 1.
Wireless IR Remote Control Receiver RECHARGEABLE MULTI-FUNCTION TRANSMITTER MICROPHONE OPERATION PART NAMES AND FUNCTIONS ! Make sure the transmitter is OFF position and minimal volume setting on amplifier/mixer before powering on the receiver. Front & Rear View 20 16 + LEVEL - CE -6dB 0dB SQ +10dB 17 (Figure 8) ! There is a presence of interference if SIGNAL indicator 3 on the receiver panel is lit, however, without turning on the transmitter.
Wireless IR Remote Control Receiver RECHARGEABLE MULTI-FUNCTION TRANSMITTER MICROPHONE TIPS IN OPERATING INFRARED REMOTE CONTROL Side View Power On & Off Operation: MIC 24 ON 22 LINE 25 OFF 22 23 ! The infrared (IR) has an approx. 15-degree trajectory angle for optimal reception. MIC/LINE Switch: Microphone/Line Switch. ! The optimal operating range of the infrared remote control is approx. 3-meter/10-feet. LINE- For electric guitar.
Wireless IR Remote Control Receiver Wireless IR Remote Control Receiver OPERATING INSTRUCTIONS To Power ON ACT-101/ACT-101i Receiver: To Power OFF ACT-101/ACT-101i Receiver: ! Ensure it is plugged into an AC outlet. ! Aim the bottom of transmitter towards the ACT Port ( ! Ensure MT-101ACT transmitter microphone is fully charged.
Rechargeable Multi-function Transmitter Rechargeable Multi-function Transmitter Accepts an External Microphone: Accepts an External Portable Audio Player: ! A headworn or lavaliere microphone with a 3.5mm mini-jack connector can be connected to the transmitter, worn by a neck lanyard and use as a bodypack transmitter. ! CD, iPod, MP3, cassette or other audio signals can be connected to the transmitter via its 3.5mm(1/8”) mini-jack connector to amplified sound.
Rechargeable Multi-function Transmitter Rechargeable Multi-function Transmitter Charging the Transmitter Microphone: Battery Charger Troubleshooting: !Plug into an AC power outlet and the end into the charger itself. ! Use the attached MIPRO 12V/500mA DC power adapter to avoid insufficient current, voltage irregularity or damaging the equipment. !Insert the transmitter into the battery charger. There are built-in contact points on both sides of the battery charger.
