User Guide TA-80 Digital Plug-on Transmitter All rights reserved. MN 016/11 Do not copy or forward without prior approvals MIPRO. Specifications and design subject to change without notice.
Digital Plug-on Transmitter Contents Digital Plug-on Transmitter Transmitter Controls and Indicators 1 Transmitter Controls and Indicators 3 Operating Instructions 4 How to Setup Transmitter Parameters 1 14 Battery Status 2 17 MUTE (ON/OFF) 3 18 Insertion and replacing the batteries 4 19 MP-80 Battery Charger (Optional) 5 6 20 MP-20 Dual-Slot Battery Charger (Optional) 12 13 7 8 9 10 11 0 1 Microphone Input: XLR-3 socket (female, balanced). 2 Housing: Metal transmitter body.
Digital Plug-on Transmitter 5 MODE Button: Allows access to available functions displaying in LCD panel. 6 SET Button: Parameter selection button. 7 ACT IR Port: Align and syncs the transmitter and receiver frequency automatically. 8 Battery cover lock: Lockable battery cover. 9 Mute Switch: Muted (red light is on); Not muted (red light is off). Digital Plug-on Transmitter Operating Instructions 10 Battery Cover: Hinged cover opens to provide access to one 18500 rechargeable battery.
Digital Plug-on Transmitter Digital Plug-on Transmitter LCD Display Screen a GRP - CH 01 - 01 GRP - CH 1 P00 FREQ. AF GAIN P00 0 dB 4 ENCRYPT 5 3 P00 515.
Digital Plug-on Transmitter GRP-CH: Displays Group and Channel Information a. Press MODE and stop on the GRP-CH function; the display showing the current group and channel will be flashing. After 30 seconds, the display will stop flashing and the current group and channel selection will be set. b. The group and channel information is now shown on the display. Changing the current group and channel must be done on the receiver.
Digital Plug-on Transmitter AF GAIN: Setup and Change of Input Sensitivity Digital Plug-on Transmitter a. AF gain -18dB ~ 30dB in 6dB increment. AF L-CUT: Setup and Change of Low Frequency Cut Off b. Press MODE and stop on the AF GAIN function; the display showing the current status will be flashing and is ready to be modified. a. Press MODE and stop on the AF L-CUT function; the display showing the current status will be flashing and is ready to be modified. c. Press SET button to set dB value.
Digital Plug-on Transmitter Digital Plug-on Transmitter ENCRYPTION: Displays Information of Encryption RF POWER: RF Power Selection a. Press MODE and stop on the ENCRYPTION function; the display showing the current status will be flashing. a. Press MODE button for selection of RF POWER. Selection of HIGH or LOW can be selected once the RF POWER LCD starts blinking. b. Screen stops flashing and remains in the set state if not operated within 30 seconds. b.
Digital Plug-on Transmitter Digital Plug-on Transmitter AF PHASE: Phase Selection of AF inputs PHANTOM: Phantom Power a. Press MODE button for selection of AF PHASE. Selection of NORM or INVER can be selected once the AF PHASE LCD starts blinking. a. Press the MODE button to select the PHANTOM screen, the LCD screen will start flashing in the current set state and is ready for change. b. Press SET button to select and set NORM or INVER. b. Press the SET button to set OFF, 12V or 48V. c.
Digital Plug-on Transmitter Digital Plug-on Transmitter SET LOCK: Setup and Change of Parameter Lock “OFF...” : Power Off a. Press MODE button once for SET LOCK display. Once SET LOCK display starts blinking it is ready for selection. 1. Press and hold power button for 2 seconds to power on & off. b. Press SET button for UNLK or LOCK selection. c. When locked (LOCK), receiver settings cannot be changed including the powering on & powering off. To power off it needs to be in unlock mode (UNLOCK). 2.
Digital Plug-on Transmitter Digital Plug-on Transmitter MUTE (ON/OFF) ERR: Error Code If the LCD displays “ERR” after turning on the power, it indicates the operation is not correct. The error codes are as follows: ROM-ER →Transmitter does not have the initial data so the microphone is completely dead and cannot be programmed. 1. Light on : “Muted”. 2. Light off : “Not Muted”. 3. MUTE setting is not affected in LOCK mode. ERROR1 →Failure on RF circuitry, frequency cannot be programmed.
Digital Plug-on Transmitter Insertion and replacing the batteries 1. Push up the battery cover lock towards outward direction, and push the battery cover sideway to open. Digital Plug-on Transmitter MP-80 Battery Charger (Optional) TA-80 transmitter and/or an additional 18500 recharge battery can be both recharged simultaneously in MP-80. TA-80 2. Ready for a 18500 rechargeable battery insertion or replacement. Battery Adaptor 18500 Rechargeable Batteries 3.
Digital Plug-on Transmitter MP-20 Dual-Slot Battery Charger (Optional) Use the Battery Charger to charge up to two rechargeable 18500 Li-ion batteries for rechargeable MIPRO handheld or bodypack transmitter. Charging Batteries: Insert the batteries with the correct positive (+) & negative (-) polarity and plug the charger into a power outlet, as shown here.
Digital Plug-on Transmitter WARNING 1. FOR OUTDOOR USE: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 2. UNDER WET LOCATION: Apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on the apparatus. 3. SERVICE INSTRUCTIONS: CAUTION - These servicing instructions are for use by qualified service personnel only.
