MI-808T Stereo Transmitter User Guide Electronics Co., Ltd. Head office: 814, Pei-Kang Road, Chiayi, 600, Taiwan. Taipei office: 5, Lane 118, Sung-teh Road, 100, Taipei, Taiwan. Web-http: //www.mipro.com.tw E-mail: mipro@mipro.com.
Stereo Transmitter Index 1. 1. Preface： 1 Preface： Thank you for choosing MIPRO's finest miniature stereo transmitter. This system is engineered to satisfy all work requirements in pro audio applications, such as musicians, performers, and directors. 2. Features of MI-808T： 2 3. Glossary： 3 To get the most out of your system, please read the applicable section thoroughly in this guide before you attempt to use the system. Characteristic of MI-808T： 4. Operating MI-808R： 4-8 5.
Stereo Transmitter Stereo Transmitter 2. Features of MI-808T： MI-808T is an UHF stereo transmittor with preset 16 non-interferece frequencies in each 24 MHz. It is the best choice for professional stage, furthermore, it is compatible with MIPRO Wireless Microphone System with its characteristic of high spurious emission. (4) (5) (6) (7) (8) Left Level Indicator, including limitor indicator. Right Level Indicator, including limitor indicator.
Stereo Transmitter Stereo Transmitter 4. Operating MI-808T： 3.Installation of Power Supply 1.Installation of Antenna Install coaxial cable on the transmitter will reach the best transmission effects but it must notice frequency consistency for both antenna and transmitter. Connect output end of DC 12V~15V/1A power supply with input socket of AC power of transmitter. To avoid the fall off of DC plug accidentally, getting through linking cable from fix hole and then fasten it. 4.
Stereo Transmitter Stereo Transmitter 8.The operating to select Stereo and Mono sound 10.Setting of Lock Function a) Press up/down key to display STEREO/MONO ON/OFF. a) b) Press left/right key, then the display start blinking. b) c) Press left key and the STEREO will display the position of ON. It indicates the selecting of Stereo transmission. Press left key, display will show LOCK ON,all setting is locked. Setting can't be changed before removing Lock function.
Stereo Transmitter Stereo Transmitter 13. Rack Installation of 2 Units of MI-808T 5. Important Notes： A) Single half-rack transmitter ① Screw the fixed rack mount ear on Left and R i ght sides. Please see below illustration for correct assembly. (Fig. 5) 1. Don't use same frequency band for both monitor and wireless microphone system when they work simultaneously. 2. It must use 50Ω coaxial cable to connect the transmission signal to exteral antennas.
NOTE﹕ 10 NOTE﹕ 11
