User Manual Part 1

13
14
Removing the Battery:
1. Push open the belt clip in the direction shown in step 1 to remove the
belt clip.
2. Press the battery wedge (9) as shown in step 2, then push down as
shown in step 3 to remove the lithium battery module.
3. LCD Panel Functions
LCD
A
RF
AF
B
BT
Mode Switch: To select from different menu
Function Selection:
The LCD panel has 6 functions displayed sequentially; their respective
descriptions and operations are as follows:
a. Press MODE (7) to access the 6 different functions. Once a function is selected, it
starts flashing on the screen. If parameter needs to be modified on selected
function, press SET (8) to modify the value while the display is still flashing. Once
done, leave it for 5 seconds until it stops flashing and the selection will be
programmed into the transmitter.
A. Operation Guide
1 2 3
Replacing the Battery:
1. Hook the battery module in position as shown in step 1.
2. Push the battery module upwards until it locks into position as shown in
step 2.
3. Push open the belt clip like step 1 on removing the battery. Then put the
belt clip back as shown in step 3.
2. Battery Removals and Installation
FREQ LOW--CU
AF--SEN
LIMIT ENCRYPGR--CH
DIGITAL WIRELESS BODY PACK TRANSMITTER
DIGITAL WIRELESS BODY PACK TRANSMITTER
1 2 3