User's Manual

Personal Wireless Public Address SystemPersonal Wireless Public Address System
18
19
RECHARGEABLE BATTERY GUIDE
Tips - To Prolong the Life of Rechargeable Batteries
Always charge the batteries before first and after use.
Always store portable system with batteries in a fully charged condition.
Always power off the portable system and transmitter/mic when NOT in use
It is OK to leave the system plugged into a power outlet when not being used for
a long time. The built-in automatic protection circuitry will auto shut-off when
fully charged. It will not harm the system or the battery.
Fully charge the system at least once every 3 months. Battery may not charge if
not charged for a prolonged periods of time.
Store in dry, cool place away from heat. Elevated temperature reduces longevity.
CAUTION: DO NOT recharge other types of batteries and connect a battery's
negative terminal to another batteries positive terminal. An explosion and/or a
fire could occur as a result. Use only rechargeable sealed lead-acid (gel cell)
batteries.
SPECIFICATIONS:
AF Power Output
T.H.D.
Frequency Response
Speaker
Audio Inputs
USB & SD Card Player
Wireless Receiver
Frequency Range
Bandwidth
Preset Channels
Antenna
Power Supply
Charging &
Operating Time
Matching Transmitter
Dimensions
Weight
Exterior Color
Approvals & Patent
Note
40W (RMS) /4 , 56W (MAX) /4ΩΩ
<1%
50Hz~18KHz
1" treble and 5" woofer
LCD displays up to 9,999 tracks, play and pause tracks
Microphone & Line input. 6.3 (1/4”) phone-jack connector.
Separate volume controls.
Φ
UHF 16 switchable channels. AutoScan and ACT technology
620~934MHz
24MHz
16 non-interfering channels
Integrated
Built-in 12V / 2.9AH rechargeable battery or optional 14.8V /
3AH lithium & 18V DC / 100 240V AC switching power
supply.
～
4 hours (automatic charging system) for up to 8 hours usage
ACT-202T Handheld Transmitter Microphone.
163(W)×206(H)×306(D)mm / 6.4(W)x8.1(H)x12(D)"
MB-25 lithium: 3.1Kg / 6.8lbs (including ACT-202T)
MB-30M gel cell: 4.0Kg / 9.0lbs. (including ACT-202T)
Black
New designs. Complies with worldwide telecommunication
and safety regulations.
!
!
Refer to actual product in the event of product discrepancy.
Varied specifications on carrier frequency range, maximum
deviation and RF output power to comply regulation of
different countries.