User Manual

9.1. 1st Drop:
This screen is used to set the rst drop. It has a single parameter.
Drop Size:This parameter is used to set the size of the drop. The unitis in milliseconds. So if you set
the drop size to 50, the valve will be open for 50 milliseconds.
Drop size cannot be zero for the rst drop as a single drop is a minimum requirement for the water
drop photography.
9.2. 2nd Drop:
This screen is used to set the second drop if needed. It hastwo parameters.
Drop Size:This parameter is used to set the size of the drop. The unitis in milliseconds. For example,
if you set the drop size to 50, the valve will be open for 50 milliseconds.
   
Home Products

Support SHOP Blog Contact Explore
