User Manual
2.5 mm stereo female jack. The camera cables have the male 2.5 mm stereo jack on one end. This
end is plugged into the camera connection port. The other end changes depending on the camera
make and model. This end is plugged in the shutter release port of your camera.
The ash cable port is a 3.5 mm stereo female jack. There is only one type of ash connection cable.
It has a 3.5 mm male jack on one end. This end is plugged into the ash connection port. The other
end of the cable is a standard PC Sync port. This end is connected to the PC Sync port of the ash
unit. If your ash does not have a PC Sync port, you can use a hot shoe adapter with a PC Sync port.
The camera and ash cables are designed to trigger the cameras and ash units only. Do not use
them for any other purpose. Doing so may damage the cable or the device.
5. Mobile Application
MIOPS Splash requires a mobile app which has been designed as an interface to congure and
control yourdevice easily.The communication between the smartphone and MIOPS Splash is done
over Bluetooth connection. So, your smartphone has to be compatible with Bluetooth 4.0.
MIOPS MOBILE app is available on iOS and Android platforms. Search for MIOPS MOBILE in your app
store, or use the following buttons to download the app.
6. Connecting to MIOPSSplash
Warning: Please make sure that your Bluetooth isturned ON in the connection preferences of your
smartphone or tablet.
After opening the mobile app, you will be asked for selecting your MIOPS product. After selecting
MIOPS Splash from the list, you will be listed all available Splash devices around. In case your device
is not shown in the list, make sure that your Splash is turned ON and click the Scan button again.
Home Products
Support SHOP Blog Contact Explore