User Manual

Delay: This parameter is used to dene the delay between the second drop and the rst drop. The
unitis in milliseconds.For example, if you set the delay to 120, the second drop will be released 120
milliseconds later than the rst drop.
You can set the drop sizeto zeroif you don't want to drip the second drop.
9.3.3rd Drop:
This screen is used to set the third drop if needed. It hastwo parameters.
Drop Size:This parameter is used to set the size of the drop. The unitis in milliseconds. For example,
if you set the drop size to 50, the valve will be open for 50 milliseconds.
Delay:This parameter is used to dene the delay between the third drop and the second drop.The
unitis in milliseconds.For example, if you set the delay to 120, the third drop will be released 120
milliseconds later than the second drop.
You can set the drop sizeto zeroif you don't want to drip the third drop.
9.4.4th Drop:
This screen is used to set the third drop if needed. It hastwo parameters.
Drop Size:This parameter is used to set the size of the drop. The unitis in milliseconds. For example,
if you set the drop size to 50, the valve will be open for 50 milliseconds.
Delay:This parameter is used to dene the delay between the fourth drop and the third drop.The
unitis in milliseconds.For example, if you set the delay to 120, the fourth drop will be released 120
milliseconds later than the third drop.
You can set the drop sizeto zeroif you don't want to drip the fourth drop.
9.5. Trigger:
This screen is used to set the output behavior of your device. It has 2 parameters:
Delay:This parameter is used to dene the delay between the last drop and triggering of the ash
or the camera.The unitis in milliseconds.For example, if you set the delay to 100, the ash or
   
Home Products

Support SHOP Blog Contact Explore
