User Manual

Please check your firmware and app versions to verify the reference of this document.
4.3 Using the Application
The app has a menu style interface to switch between different modes. The initial
menu will appear on the left hand side of the screen. Different modes will be listed
from top to button. You can select the mode you want to use by touching the icon.
The menu will scroll down to show additional modes that do not fit into the
screen. The menu will disappear once you select any mode and the app will enter
in to the configuration page of that particular mode. You can switch between
different modes anytime. In order to do that, you need to touch the menu icon on
the top-right hand side of the screen. When you switch back and forth between
different modes, the settings will not change.
The first button on the menu is
Search Devices button. This button
is used if you haven't connected to
your MIOPS as you have started the
app. You can use the same button if
your MIOPS has disconnected for
some reason. The range, in which a
MIOPS unit can be discovered,
depends on different factors. If your
device is not discovered by the app,
get closer to the MIOPS. If there is
too much interference in the
environment, it may take longer to
connect. If you have multiple MIOPS
units in the area, you will see all of
them on the screen. You can
connect to a single MIOPS at a time.
The Bluetooth connection is only needed until you have configured your MIOPS.
Once you have successfully configured your MIOPS, you don't need keep the app
running. If you want to switch to another mode or change settings, you will need