User Manual

Please check your firmware and app versions to verify the reference of this document.
4. Smartphone App
The smartphone app is the dedicated interface to configure and control your
MIOPS. It is available on iOS and Android platforms. You will receive software
updates over AppStore and Android Market. The iOS version must be 7.0 or
higher. The Android version must be 4.3 or higher. The communication between
the smartphone and MIOPS is done over Bluetooth connection. Your smartphone
has to be compatible with Bluetooth 4.0. The interface of the application is very
similar for most of the functions. They have only a few minor differences in some
of the modes. The difference will not change the user experience.
4.1 Installing the Application
The app name is MIOPS Smart on AppStore and Android Market. You can
download and install it from the repositories just like any free app. There is no
registration needed to use the application. If your smartphone version is
compatible, you can install it to your phone by following the regular app install
procedure.
4.2 Starting the Application
You will see the MIOPS logo on the screen of your phone. You can start the
application by touching the MIOPS icon. Make sure that your phone is not in
Airplane mode. Otherwise, MIOPS cannot communicate with your phone.
Bluetooth must set to ON on your smartphone as well.