User Manual

Please check your firmware and app versions to verify the reference of this document.
2. Specifications
In this section you can find the technical specifications of MIOPS. The
specifications of your MIOPS may change depending on your model and some of
the specifications may not be applicable for your device.
LCD Screen: 128 x 128 pixels
Battery: 3.7 Vdc, 1020 mAh, 3.8 Wh
Bluetooth: Bluetooth 4.0 (Low Power)
USB Interface: 5 Vdc
3. Charging and Operation
MIOPS can only be used with the provided rechargeable battery and USB connection.
The battery will be charged when you connect MIOPS to a USB power source. You can
use your computer USB port for this purpose. You can power MIOPS directly from the
USB port if the battery is not in the device. Using MIOPS with other type of battery and
power source may harm your device.
When you connect your MIOPS to a USB power source, it will start to charge the
battery automatically. The power led will light up when the battery is charging. When
the battery is full, the Power LED will dim. You can see the remaining battery
percentage on the screen of MIOPS in any mode.