User Manual

Please check your firmware and app versions to verify the reference of this document.
5. Standalone Operation
You can use your MIOPS as a standalone device without the involvement of your
smartphone. If you use MIOPS as a standalone device, you can set it to six basic
modes: Lightning, Sound, Time Lapse, Laser, HDR and DIY modes. The advanced
modes are available with the smart phone application only. The scenario mode will be
enabled for the previously saved scenarios. If you have previously used MIOPS is
scenario mode, the latest versions of them will be available in MIOPS as a standalone
device. You can reuse them, but you cannot make any changes on them.
The parameters of the basic modes are the same with the smartphone application.
You can set the parameters with the buttons on the device. MIOPS features a device
menu system which enables you to use the device very easily. The menu has two
levels: Main Menu and Sub-menus. The Main Menu lets you to switch between
different modes of operation. You can navigate on modes by using the right and left
scroll buttons. To operate in a certain mode you need to enter the Sub-menu of that
mode by pressing the Start button. Each mode of operation has its own Sub-Menu
where you can adjust the settings of that mode as mentioned in the following
sections. You can always switch back to the Main Menu from Sub-menus by pressing
the Menu button.